Installation Guide

ManualsBrandsEbern Designs ManualsCeiling LightsAmante 9 - Light Shaded Tiered Chandelier

1of4

LightSourceToolsRequired

BULB BASE TYPE

Medium (E26)

BULB SHAPE

TYPE A

100W

MAX

9BULBSREQUIRED

BULBSNOTINCLUDED

Warnings and Cautions

Turn off the electricity at the circuit breaker

before installation. Consult a licensed

electrician if in doubt about installation.

Turn off power to the fixture and allow the

bulbs to cool before replacing.

Crossbar Assembly

Package Contents

PARTS BAG

Fixture Body

Crossbar AssemblyFixture Loop Fixture Chain

Ceiling Canopy Shade & Bulb

Table of

Contents

STEP 1 STEP 2 STEP 3 STEP 5 STEP 6

FixtureHeightAdjustable

34.25”to130.25”

Fixture Chain

Ceiling Canopy

Quick Link

Preparation: Identify and inspect all parts

before beginning the installation.

Missing or damaged parts? Contact your

original place of purchase.

Wiring

STEP 4

Fixture Loop

Shade (Varies according

to style purchased)

Note: Shade shape is for

illustration purpose only. Your

shade shape may vary from

illustration.

Outlet Box Screw

Wire Connector

Installation Guide

Summary of content (4 pages)

PAGE 1
Installation Guide Tools Required Fixture Height Adjustable 34.25” to 130.25” Light Source 100W MAX Warnings and Cautions Turn off the electricity at the circuit breaker before installation. Consult a licensed electrician if in doubt about installation. BULB BASE TYPE BULB SHAPE Medium (E26) TYPE A Turn off power to the fixture and allow the bulbs to cool before replacing. 9 BULBS REQUIRED BULBS NOT INCLUDED Package Contents Note: Shade shape is for illustration purpose only.
PAGE 2
STEP 1 1 2 Step 1 Unfold Support Arms Step 2 Install Fixture Loop L STEP 2 1 Step 1 Install crossbar assembly 2 3 Step 2 - 3 Test fitting ceiling canopy to nipple 2of4 N
PAGE 3
STEP 3 2 1 3 Step 2 - 3 Install Fixture Chain Step 1 Adjust fixture chain length L N L N Suggested Chain Length: 8’ ceiling: 10” Chain 9’ ceiling: 22” Chain 10’ ceiling: 32” Chain STEP 4 1 2 Step 1 Feed the fixture wires through the loop L N White wire (neutral) from outlet box Supply wire from fixture ribbed side or identified with the Label “N” Black or Red wire (hot) from outlet box supply wire from fixture smooth side or identified with the label “L” Bare or Green ground wire from out
PAGE 4
STEP 5 STEP 6 1 2 Note: Shade shape is for illustration purpose only. Your shade shape may vary from illustration.