Installation & Assembly

Table Of Contents

Assembly Instruction

WARNING:

>This unit has been designed to support the

maximum loads shown. Exceeding these

load limits could cause sagging, instability,

product collapse, and/or serious injury.

>DO NOT allow children to climb on unit.

>Put heavier items on lower shelves.

Recommended Maximum Weight

*Unit in Pound(lbs)

STEP 4

Attach Panel (B) to the assembled unit with

Small Round Leg (7), Round Pole (5) and

Screw (3).

STEP 5

Attach Panel (C) with Small Round Leg (7) and

Screw (3).

STEP 6

Attach Right Side Panel (E) with Screw (3). 7.1 Attach Left Side Panel (D) with Screw (3) and

lock the Mini Fix Cam (2), as shown.

7.2 Cover the Screw with Screw Sticker (8).

STEP 7

Tool RequiredTool Required

Recomm. 2 Person

Approx. 30 minutes

Low Rise TV Stand

PAGE 1
STEP 4 STEP 5 Attach Panel (B) to the assembled unit with Small Round Leg (7), Round Pole (5) and Screw (3). Attach Panel (C) with Small Round Leg (7) and Screw (3). Assembly Instruction Low Rise TV Stand STEP 6 STEP 7 Attach Right Side Panel (E) with Screw (3). 7.1 Attach Left Side Panel (D) with Screw (3) and lock the Mini Fix Cam (2), as shown. 7.2 Cover the Screw with Screw Sticker (8). Approx. 30 minutes Recomm.
PAGE 2
No Hardware List Qty No Parts List Qty 1 Mini Fix Bolt 6pcs A Top Panel 1pc 2 Mini Fix Cam 6pcs B Shelf Panel 1pc 3 Screw 8pcs C Bottom Panel 1pc 4 Dowel 8pcs D Left Side Panel 1pc 5 Round Pole 3pcs E Right Side Panel 1pc 6 Insert Cap 2pcs F Back Panel 1pc 7 Small Round Leg 2pcs 8 Screw Sticker 4pcs 9 Nail Leg 6pcs STEP 1 1.1 1.2 1.3 1.4 Insert Mini Fix Bolt (1) into Panel (A&B). Press Insert Cap (6) into Panel (A) with a little pressure .