Manual

c) Special functions

Numeric key Function Voice output

5 The following language is selected by pressing Key 5.

Repeat the function until the required language is announced.

Language selected: Input command

• German (in the selected language)

• Swedish

• English

• French

The following function, numeric key 6, only applies for the trade appliances (retrofit) –

diagnosis cable (blue / white) must be connected

6 Enquire heater condition • Heater OK – Input command

(Diagnosis analysis) • Heater not OK – Input command

• Input invalid – Input command

(if diagnosis cable not connected)

7 Change PIN Input new PIN

xxxx Enter new PIN Input new PIN

xxxx Enter new PIN • PIN OK – Input command

(for confirmation) • Input invalid – Input command

8 No function Input invalid – Input command

9 No function Input invalid – Input command

Problem Possible cause Possible corrective measure

No connection No supply voltage Check fuse and wiring

to the CALLTRONIC Weak signal Change location of the vehicle; check antenna

Outside of the GSM supply area Check the supply range of the network operator

Network block set Check network blocks

Network overloaded Call again later

SIM card invalid Call using another phone network operator

SIM card incorrectly inserted Ensure that the SIM card has been correctly

inserted; the card holder must lock home

SIM card contacts soiled Clean the SIM card with a dry cloth

SIM card with wrong number Only SIM cards with 3 volts possible

of volts

SIM card damaged Carry out a visual check;

give SIM card back to network operator

Fault correction

If problems occur while you are using the

CALLTRONIC

, first try to find a solution in the

following list.

If the problem continues, please contact an

Eberspächer service workshop.