Product Data Sheet QG030-303/14 Product Data Sheet QG030-303/14 The engineer's choice
Product Data Sheet QG030-303/14 QG030-303/14 INDEX 1 General ...................................................................................................................................................................... 3 2 Mechanics ................................................................................................................................................................. 3 2.1 2.2 3 Operating Data ..........................................................................
Product Data Sheet QG030-303/14 1 General Fan type Rotational direction looking at motor Airflow direction Bearing system motor Bearing system rotor Mounting position - shaft 2 Mechanics 2.1 General Width Height Depth Mass Material spiral with tongue side part material Impeller material surface protection rotor housing 2.
Product Data Sheet QG030-303/14 3 Operating Data 3.1 Electrical Operating Data Measurement conditions: Normal air density = 1,2 kg/m3; Temperature 23°C +/- 3°C; Motor axis horizontal;warm-up time before measuring 5 minutes (unless otherwise specified).In the intake and outlet area should not be any solid obstruction within 0,5 m. ∆p = 0: I: corresp. to free air flow (see chapter aerodynamics) corresp. to arithm.
Product Data Sheet QG030-303/14 3.3 Aerodynamics Measurement conditions: Measured in suction side throttled double-chamber test rig acc. DIN EN ISO 5801 and using a dedicated ebmpapst-setup for cross flow blowers. Normal air density = 1,2 kg/m3; Temperature 23°C +/- 3°C; In the intake and outlet area should not be any solid obstruction within 0,5 m. Motor shaft horizontal. The information is only valid under the specified test conditions and may be changed by the installation conditions.
Product Data Sheet QG030-303/14 4.2 Climatic Requirements Humidity requirements Water exposure Dust requirements Salt fog requirements humid heat, constant; according to DIN EN 60068-2-78, 14 days None None None Permitted application area: The product is intended for use in sheltered rooms with controlled temperature and controlled humidity. Directly exposure to water must be avoided.
Product Data Sheet QG030-303/14 6 Reliability 6.1 General Life expectancy L10 at TU = 40 °C Life expectancy L10 at TU max. Life expectancy L10 acc. to IPC 9591 at TU = 40 °C 30.000 h 20.000 h 50.
