User Manual

Operating instructions
A4E300-AS72-01
Translation of the original operating instructions
3.2 Nominal data
Motor M4E068-CF
Phase 1~ 1~ 1~
Nominal voltage / VAC 230 230 230
Frequency / Hz 50 60 60
Type of data definition ml ml ml
Valid for approval /
standard
CE CE UL 2111
Speed / min
-1
1320 1500 1500
Power input / W 72 90 96
Current draw / A 0.32 0.4 0.42
Motor capacitor / µF 2 2 2
Capacitor voltage / VDB 400 400 400
Capacitor standard P0 (CE) P0 (CE) UL
Max. back pressure / Pa 60 60 60
Min. ambient temperature
/ °C
-25 -25 -25
Max. ambient
temperature
/ °C
50 50 50
Starting current / A 0.6 0.57 0.6
ml = Max. load · me = Max. efficiency · fa = Running at free air
cs = Customer specs · cu = Customer unit
Subject to alterations
3.3 Technical features
Mass 1.8 kg
Size 300 mm
Surface of rotor Coated in black
Material of blades Press-fitted sheet steel blank, sprayed
with PP plastic
Number of blades 5
Direction of air flow "V"
Direction of rotation Counter-clockwise, seen on rotor
Type of protection IP 44; Depending on installation and
position as per EN 60034-5
Insulation class "B"
Humidity class F1-2
Mounting position Any
Condensate discharge
holes
Rotor-side
Operation mode S1
Motor bearing Ball bearing
Touch current acc.
IEC 60990 (measuring
network Fig. 4, TN
system)
< 0.75 mA
Motor protection Thermal overload protector (TOP) wired
internally
Cable exit Variable
Protection class I (if protective earth is connected by
customer)
Product conforming
to standard
EN 60335-1; CE
Approval CCC; EAC
For cyclic speed loads, note that the rotating parts of the device
are designed for maximum one million load cycles. If you have
specific questions, contact ebm-papst for support.
3.4 Mounting data
For depth of screw, see chapter 3.1 Product drawing
; Secure the mounting screws against accidentally coming loose (e.g.
by using self-locking screws).
Strength class for
mounting screws
8.8
You can obtain additional mounting data from the product drawing if
necessary.
3.5 Transport and storage conditions
; Use the device in accordance with its protection type.
Max. permissible
ambient motor temp.
(transp./ storage)
+ 80 °C
Min. permissible
ambient motor temp.
(transp./storage)
- 40 °C
Item no. 10906-5-9970 · Revision 82702 · Release 2014-05-08 · Page 5 / 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone [phone] · Fax [phone] · [e-mail] · www.ebmpapst.com