User guide

94
10 Parameter Description
This chapter describes the functions of the available parameters.
NOTE
• For a list of all parameters, see Chapter 6.2 Parameter, page 32. The possible assignable status outputs are listed
page 110.
Parameter memory
The parameter memory can store all the parameters listed in the following as non-volatile memory, if a STORE command is received.
Use the RESTORE command to restore the factory settings.
Parameter 0x1: Mode 1
Description: The parameter Mode 1 contains the configuration for the Input IN 1. This parameter describes how the input IN 1 is to be used and which
control task it undertakes.
Parameter 0x2: Mode 2
Description: The parameter Mode 2 contains the configuration for the Input IN 2. This parameter describes how the input IN 2 is to be used and which
control task it undertakes.
Parameter 0x3: Use the output OUT1
Description: The parameter defines which status output is output at output OUT1.
Parameter 0x4: Use of the output OUT2
Description: The parameter defines which status output is output at output OUT 2.
Parameter 0x5: Use of the output OUT3
Description: The parameter defines which status output is output at output OUT 3.