Manual

Operating instructions
G1G170-AB53-80
Translation of the original operating instructions
4.4 Connection diagram
No. Pin Signal Function / assignment
ST1 1, 2, 3 L, N, PE Power supply 230 VAC, 50-60 Hz, phase, neutral, protective earth
ST2 1 10V/ max.
10mA
Voltage output 10 VAC (+/-3%), max. 10 mA, power supply for ext. devices (e.g. potentiometer), SELV
ST2 2 DUE Speed monitoring, 3 pulses per revolution, SELV
ST2 3 0-10V Control input 0-10 V, impedance 100k, SELV
ST2 4 PWM Control input PWM, 1-6 kHz, SELV
ST2 5 GND GND - Connection for control interface, SELV
Item no.: 51177-5-9970 · Revision: 73287 · Print-out: 2012-04-11 · Y. Uhlmann (VM-TDO) · Page 9 / 12
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone [phone] · Fax [phone] · [e-mail] · www.ebmpapst.com