Instruction Manual

Operating instructions
G3G200-GN20-01
Translation of the original operating instructions
4.3 Connection screen
No. Pin Signal Function / assignment
ST1 1; 2; 3 L; N; PE Power supply 230 VAC, 50 - 60 Hz, phase, neutral, protective earth
ST2 1 UB External voltage 16 - 45 VDC, residual ripple +/- 3.5%, SELV
ST2 2 Tach Speed monitoring, 3 pulses per revolution, SELV
ST2 3 0 - 10 V Control input 0 - 10 V, impedance 100k, SELV
ST2 4 PWM Control input PWM, 1 - 6 kHz, SELV
ST2 5 GND GND - Connection for control interface, SELV
Item no. 50365-5-9970 · Revision 68161 · Release 2009-10-09 · Page 9 / 12
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone [phone] · Fax [phone] · [e-mail] · www.ebmpapst.com