Manual

Operating instructions
W1G200-HH01-52
Translation of the original operating instructions
3.2 Nominal data
Motor M1G074-BF
Nominal voltage / VDC 48
Nominal voltage
range / VDC
36 .. 57
Frequency / Hz -
Type of data definition fa
Speed / min
-1
2950
Power input / W 55
Current draw / A 1.3
Max. back pressure / Pa 120
Min. ambient temperature
/ °C
-25
Max. ambient
temperature
/ °C
60
ml = Max. load · me = Max. efficiency · fa = Running at free air
cs = Customer specs · cu = Customer unit
Subject to alterations
3.3 Technical features
Mass 2.1 kg
Size 200 mm
Surface of rotor Coated in black
Material of blades Sheet steel, coated in black
Material of wall ring Die-cast aluminium
Number of blades 9
Direction of air flow "V"
Direction of rotation Counter-clockwise, seen on rotor
Type of protection IP 42
Insulation class "B"
Humidity class F0
Mounting position any
Condensate discharge
holes
None
Operation mode S1
Motor bearing Ball bearing
Technical features - Tach output
- Motor current limit
- Soft start
- Control input 0-10 VDC / PWM
Electrical leads Via terminal strip
Motor protection Reverse polarity and locked-rotor
protection
Protection class I (if protective earth is connected by
customer)
Product conforming
to standard
EN 60950-1
Approval CCC; EAC; UL 1004-1; CSA C22.2
Nr.77
For cyclic speed loads, note that the rotating parts of the device
are designed for maximum one million load cycles. If you have
specific questions, contact ebm-papst for support.
3.4 Mounting data
For depth of screw, see chapter 3.1 Product drawing
; Secure the mounting screws against accidentally coming loose (e.g.
by using self-locking screws).
Strength class for
mounting screws
8.8
You can obtain additional mounting data from the product drawing if
necessary.
3.5 Transport and storage conditions
; Use the device in accordance with its protection type.
Max. permissible
ambient motor temp.
(transp./ storage)
+ 80 °C
Min. permissible
ambient motor temp.
(transp./storage)
- 40 °C
3.6 Electromagnetic compatibility
EMC interference
immunity
Acc. to EN 61000-6-2 (industrial
environment)
EMC interference
emission
Acc. to EN 55022 (Class B)
Item no. 50290-5-9970 · ENG · Revision 83494 · Release 2014-09-26 · Page 5 / 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone [phone] · Fax [phone] · [e-mail] · www.ebmpapst.com