Product Data Sheet 5314/2 TDHHPU Product Data Sheet 5314/2 TDHHPU The engineer's choice
Product Data Sheet 5314/2 TDHHPU 5314/2 TDHHPU INDEX 1 General ............................................................................................................................................................... 3 2 Mechanics .......................................................................................................................................................... 3 2.1 2.2 3 Operating Data ......................................................................................
Product Data Sheet 5314/2 TDHHPU 1 General Fan type Rotating direction looking at rotor Airflow direction Bearing system Mounting position - shaft 2 Mechanics 2.1 General Fan Counterclockwise Air intake over struts Ball bearing Any Width Height Depth Mass Housing material Impeller material Max. torque when mounted across both mounting flanges Screw size 2.
Product Data Sheet 5314/2 TDHHPU 3 Operating Data 3.1 Electrical Interface - Input Control input PWM Features PWM - Frequency 1 kHz - 10 kHz typical: 2 kHz Characteristics Schematics PWM input transistorrequirements: UCEmax. => 12 V; I Sink max. > 5 mA; UCEsat. < 0,15 V Speed control: By Puls width modulation (PWM) 0 ... 100% Open collector in relation to signal-ground.
Product Data Sheet 5314/2 TDHHPU f: 2 kHz +-20% Information to the curve: 0% - <=7% PWM: 0 1/min (Fan off) 7% PWM: 1.000 1/min (Start-up, comming from 0% PWM) 7% - 10 % PWM: 1.000 1/min (corresponding to min. speed) 10% - 90% PWM: linear increasing curve 90% - 100% PWM: 7.000 1/min (corresp. to max. fan speed) 5% PWM: 800 1/min bzw. 0 1/min (Fan turns off, comming from 100% PWM) 3.
Product Data Sheet 5314/2 TDHHPU 3.3 Electrical Interface - Output Tacho type Features Tacho operating voltage Tacho signal Low Tacho signal High Maximum sink current External resistor Tacho frequency Tacho isolated from motor Slew rate /2 (open collector) Note UBS US low US high Isink Values Min.: 4 V Max.: 60 V <= 0,4 V 60,0 V <= 20 mA External resistor Ra from UBS to US required. All voltages measured to GND.
Product Data Sheet 5314/2 TDHHPU Locked rotor protection Locked rotor current at UN Clock signal at locked rotor Auto restart Iblock t3 / t4 typical: 1,5 s / 10,0 s Internal Fuse: Littlefuse NANO2(R) FUSE; Very fast acting 451 Series; 12 A (Art.-Nr.: 451012) To note inrush current @ U nom: The internal electrolytic capacitors 2*270uF/50V has inrush current limitation, the existing peak depends on ceramic capacitors.
Product Data Sheet 5314/2 TDHHPU 3.5 Aerodynamics Measurement conditions: Measured with a double chamber intake rig acc. to DIN EN ISO 5801. Normal air density = 1,2 kg/m3; Temperature 23°C +/ - 3°C; In the intake and outlet area should not be any solid obstruction within 0,5 m. Motor shaft horizontal. The information is only valid under the specified test conditions and may be changed by the installation conditions.
Product Data Sheet 5314/2 TDHHPU 01/31/2019 page 9 of 12
Product Data Sheet 5314/2 TDHHPU 3.6 Sound Data Measurement conditions: Sound pressure level: 1 meter distance between microphone and the air intake. Sound power level: Acc. to DIN 45635 part 38 (ISO 10302) Measured in a semianchoic chamber with a background noise level of Lp(A) < 5 dB(A) For further measurement conditions see chapter aerodynamics. a.) Operation condition: 7.
Product Data Sheet 5314/2 TDHHPU 5 Safety 5.1 Electrical Safety Dielectric strength DIN EN 60950 (VDE 0805) and DIN EN 60335 (VDE 0700) A.) Type test Measuring conditions: After 48h of storage at 95% R.H. and 25°C. No arcing or breakdown is allowed! All connections together to ground. B.) Routine test Measuring conditions: At indoor climate. No arcing or breakdown is allowed! All connections together to ground. Isolation resistance Measuring conditions: After 48h of storage at 95% R.H.