Product Data Sheet AC100 NR-017 (Var.
Product Data Sheet AC100 NR-017 (Var.: 2speed + boost) AC100 NR-017 (Var.: 2speed + boost) INDEX 1 General ............................................................................................................................................................... 3 2 Mechanics .......................................................................................................................................................... 3 2.1 2.2 3 Operating Data ..........................................
Product Data Sheet AC100 NR-017 (Var.: 2speed + boost) 1 General Fan type Rotating direction looking at rotor Airflow direction Bearing system Mounting position - shaft 2 Mechanics 2.1 General Width Height Depth Diameter Mass Housing material Impeller material 2.
Product Data Sheet AC100 NR-017 (Var.
Product Data Sheet AC100 NR-017 (Var.: 2speed + boost) 3 Operating Data 3.1 Electrical Interface - Input External voltage supply for input and output signals must be SELV conform.
Product Data Sheet AC100 NR-017 (Var.: 2speed + boost) 3.2 Electrical Operating Data Measurement conditions: ∆p = 0: I: Normal air density = 1,2 kg/m3; Temperature 23°C +/- 3°C; Motor axis horizontal;warm-up time before measuring 5 minutes (unless otherwise specified).In the intake and outlet area should not be any solid obstruction within 0,5 m. corresp. to free air flow (see chapter aerodynamics) corresp. to arithm.
Product Data Sheet AC100 NR-017 (Var.: 2speed + boost) 3.4 Aerodynamics Measurement conditions: Measured with a double chamber intake rig acc. to DIN EN ISO 5801. Normal air density = 1,2 kg/m3; Temperature 23°C +/ - 3°C; In the intake and outlet area should not be any solid obstruction within 0,5 m. Motor shaft horizontal. The information is only valid under the specified test conditions and may be changed by the installation conditions.
Product Data Sheet AC100 NR-017 (Var.
Product Data Sheet AC100 NR-017 (Var.: 2speed + boost) 3.5 Sound Data Measurement conditions: Sound pressure level: 1 meter distance between microphone and the air intake. Measured in a semianchoic chamber with a background noise level of Lp(A) < 5 dB(A) For further measurement conditions see chapter aerodynamics. a) Operation condition: 3.300 1/min at free air flow b) Operation condition: Frequency: 50 Hz Nominal voltage: 230 V Frequency: 60 Hz 4 Environment 4.1 General Min.
Product Data Sheet AC100 NR-017 (Var.: 2speed + boost) 5 Safety 5.1 Electrical Safety A verification of thermal conditions (normal and abnormal operation) as well as the protection against electric shock, ingress of solid foreign objects and water has to be done in conjuction with the appliance. Test voltage HV type test Unit test voltage Time type test HV Insulation resistance Protection class 5.
