Product Data Sheet QG030-148/14R Product Data Sheet QG030-148/14R The engineer's choice
Product Data Sheet QG030-148/14R QG030-148/14R INDEX 1 General ............................................................................................................................................................... 3 2 Mechanics .......................................................................................................................................................... 3 2.1 2.2 3 Operating Data ......................................................................................
Product Data Sheet QG030-148/14R 1 General Fan type Rotational direction looking at motor Airflow direction Bearing system motor Bearing system rotor Mounting position - shaft 2 Mechanics 2.1 General Width Height Depth Mass Material spiral with tongue side part material Impeller material surface protection rotor housing 2.
Product Data Sheet QG030-148/14R 3 Operating Data 3.1 Electrical Operating Data Measurement conditions: Normal air density = 1,2 kg/m3; Temperature 23°C +/- 3°C; Motor axis horizontal;warm-up time before measuring 5 minutes (unless otherwise specified).In the intake and outlet area should not be any solid obstruction within 0,5 m. ∆p = 0: I: corresp. to free air flow (see chapter aerodynamics) corresp. to arithm.
Product Data Sheet QG030-148/14R Blower restart possible after a short power shut down. 3.3 Aerodynamics Measurement conditions: Measured in suction side throttled double-chamber test rig acc. DIN EN ISO 5801 and using a dedicated ebmpapst-setup for cross flow blowers. Normal air density = 1,2 kg/m3; Temperature 23°C +/ - 3°C; In the intake and outlet area should not be any solid obstruction within 0,5 m. Motor shaft horizontal.
Product Data Sheet QG030-148/14R The value of the max.
Product Data Sheet QG030-148/14R 3.4 Sound Data Measurement conditions: Sound pressure level: 1 meter distance between microphone and the air intake. Sound power level: Acc. to DIN 45635 part 38 (ISO 10302) Measured in a semianchoic chamber with a background noise level of Lp(A) < 5 dB(A) Measured without dedicated ebmpast-setup for cross-flow blowers For further measurement conditions see chapter aerodynamics. Operation condition: 4.
Product Data Sheet QG030-148/14R 5 Safety 5.1 Electrical Safety Dielectric strength DIN EN 60950 (VDE 0805) and DIN EN 60335 (VDE 0700) A.) Type test Measuring conditions: After 48h of storage at 95% R.H. and 25°C. No arcing or breakdown is allowed! All connections together to ground. B.) Routine test Measuring conditions: At indoor climate. No arcing or breakdown is allowed! All connections together to ground. Isolation resistance Measuring conditions: After 48h of storage at 95% R.H.
