Datasheet

m
3
c V V B / W r ° H H
4 2 1 7 5 6 2 - 6 1
4 2 2 1 5 5 2 - 6 1
4 2 2 1 5 5 2 - 6 1
5 3 4 3 6 1 3 - 3 5
98
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level L
W
A ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level L
p
A measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
– Possible special versions:
(See chapter DC fans - specials):
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
Max. 61 m
3
/h
– Material: Scroll housing: GRP
1)
Impeller: GRP
1)
– Direction of air flow: Axial: Intake,
Centrifugal: Exhaust
– Connection: via single wires AWG 26, TR 64
– Highlights: Forward-curved impeller
– Weight: 170 g
1) Fiberglass-reinforced plastic
Type m
3
/h cfm VDC VDC Bel(A) / Watts rpm
-1
°C Hours Hours
RL 65-21/12 56 32,9 12 6.8...13.8 6.6 15.0 4 500 -20...+70 60 000 / 30 000 102 500 ¿
RL 65-21/12 H 61 35,8 12 6.8...13.2 6.8 19.2 4 900 -20...+55 55 000 / 40 000 92 500 ¡
RL 65-21/14 56 32,9 24 12...26.4 6.6 14.0 4 500 -20...+70 60 000 / 30 000 102 500 ¿
RL 65-21/14 H 61 35,8 24 12...26.4 6.8 18.0 4 900 -20...+60 55 000 / 35 000 92 500 ¡
Subject to change
Nominal voltage Air flow Air flow Voltage range
Sound power level
Sintec sleeve bearings Ball bearings Power consumption Nominal speed Temperature range Service life L
10
(40 °C)
ebm-papst standard Service life L
10
(T
max
)
ebm-papst standard
Life expectancy L
10IPC
(40 °C) see page 17
Curve
Tin-plated
DC centrifugal fans
97 x 93.5 x 33 mm
Series RL 65
Nominal data
Snap-in fins for
easy latch