Operation Manual

• Plug in the iron and set the temperature selector Fig.1 (6) to the desired

position. The pilot light Fig.1 (7) will go off when that temperature is

reached.

SPRAY

• Spray can be obtained by pressing the respective button Fig.1 (4), dry or

with steam. The temperature level does not matter.

• Press the spray button Fig.1 (4) as many times as you like to use this func-

tion.

• Do not use the spray on silk garments, since the drops of water can leave

marks.

STORAGE AND CLEANING:

• Unplug the iron and empty the water from the tank. Turn the steam adjust-

ment control Fig.1 (5) to the self-cleaning position Fig.6 and remove the

needle together with the steam adjustment control.

• To clean the needle, use a cloth moistened with vinegar and then rinse it

with tap-water.

• We recommend cleaning the soleplate or removing residue stuck to it with

a piece of wet cotton wool or non-abrasive products.

TIPS FOR DISPOSING OF THE USED APPLIANCE:

• Prior to the disposal of your used appliance, you must make sure that it is

clearly non-functional, and that it is disposed of in accordance with the

national laws in force. Ask your Distributor, Town Council or Local Authority

for detailed information in this respect.

GUARANTEE CONDITIONS

• Solac is not liable for the failures of your appliance in the case of breach of

the specifications of the Guarantee Conditions or if the operation and main-

tenance instructions, which have been included in the instructions brochure

for each appliance, are not properly followed.

• The Guarantee conditions can be found in the attached booklet World-wide

Guarantee.

• Remember that the damages caused by the effect of scale are not covered

in the Guarantee.