User guide

5-1-2012 5 ebode BTS30
Previous/Volume up
Short press”
” is for volume up and long press “ ” is
for next song.
Next/Volume down
Short press”
” is for volume down and long press “ ”
is for previous song.
Turn off
Press the”
” button for 3 seconds. (a tone voice beep
and all LED lights are off)
Low battery warning The LED flashes
Charging Plug the charger to “ ” port of the device.(Red LED is on)
4. Pairing the BT Sound
To use your BT Sound, you must first pair it with a phone or a computer. Once your
Bluetooth® speaker is paired to a specific mobile phone, they will remain paired and
automatically recognize each other whenever they are within range.
Pairing the BT Sound to a smartphone
:
- Turn on your phone and ensure its Bluetooth® function is activated
- Turn on the BT Sound and go to the paring mode.
- Search your Bluetooth® devices on your phone by following the phone’s instructions.
- After a few second the phone will list the “ebode BT Sound” as a device. Select it and
follow your phone instruction to complete the connection.
- If your phone requests a passkey or PIN, enter 0000.
- Your phone will confirm the pairing, press Yes/Ok.
- Finally, select to connect the BT Sound from your phone.
Pairing the BT Sound to a computer
:
- If your computer supports no Bluetooth® function, a Bluetooth® adapter is necessary.
Connect the adapter to your computer and ensure its Bluetooth® function is
activated.
- Turn on the BT Sound and go to the paring mode.
- Open the Bluetooth® software installed on your computer, and select “Search your
Bluetooth® devices” function. Refer to user manual of the Bluetooth® software for
more information.
- After a few second the “ebode BT Sound” will be listed in Bluetooth® software of your
computer as a device. Select this icon and click the right button of your mouse to
select ”pairing”, then select “ connect with audio device” with same operation.
5. Charging your BT Sound
The BT Sound is convenient to connect to an AC charger or a USB charger with Mini DC 2.0
port marked with “
” Make sure that your BT Sound is fully charged for at least 6 hours
before initial use. While charging, the red LED of the BT Sound is in solid red. When charging
is completed, the LED turns off.
Questions? Please visit our website www.ebodeelectronics.eu
for FAQ and our contact details.