User manual

31-7-2014 59 ebode IPV58P2P
6.9 System
In this panel, you can back-up / restore your camera settings, upgrade the firmware to
the latest version, restore the camera to default settings and reboot the device.
6.9.1 Back-up & Restore
Click Backup to save all the parameters you have set. These parameters will be stored in
a bin file for future use.
Click Browse and select the parameters file you have stored, then click Submit to restore
the restore the parameters.
Figure 6.67
6.9.2 System Upgrade
Click Browse, choose the correct bin file( System firmware or Web UI) and then click
System upgrade. Don’t shut down the power during upgrade. After upgrading, you can
see the upgrade result.
Figure 6.68
If you want to verify the firmware version of you camera, please go to Device Status->
Device Information Page to check.
Upgrade Firmware by IP Camera Tool
Double click the IP Camera Tool shot icon , select the Camera IP that you want to
upgrade the firmware. Then select Upgrade Firmware and enter the username and
password, choose the firmware file, and upgrade.