User guide

Jul 2013 IPV38 / IPV38WE
28
NOTE: UPnP is only for port forwarding. It relates to the security settings of your router, make sure the UPnP function of
your router is enabled, before you continue. If your router does not support UPnP, it may show error information,
therefore we recommend you to do port forwarding manually in your router, as explained in step 3.7.3. If your router has
UPnP and you cannot access your camera from outside your network please use manual portforwarding in step 3.7.3.
always leave UPnP on!
1.9.5 DDNS Service Settings

Select Network > DDNS Service Settings in the Tree View on the left (see picture above)
There are 2 options:
Manufacturer’s DDNS: This domain is provided with the Camera (see the sticker on the bottom of the camera). We
suggest you to use our provided DDNS server and set DDNS Service to “None” and choose ‘submit’. In most cases you
will need to login to the camera again. You can use the IPCamera tool for this or enter the Camera`s IP address in your
web browser. After you have done this, please skip the next step and continue with step 3.7.1
Third Party DDNS: You might have a DDNS server already, then it is useful to take the next steps.
This domain is provided by the third party, such as Dyndns, Oray, 3322 etc.
Figure 7.1
Third Party DDNS
If you use third party DDNS, please choose the server you use, such as “3322.org” or “dyndns.org” as below: