Operation Manual

31-7-2014 43 ebode IPV38P2P
Step 2, DO DDNS Service Settings within the Camera
Please set DDNS Settings within the camera by hostname, a user name and password
you’ve got from www.no-ip.com. Take hostname ycxgwp.no-ip.info, user name ipcamera,
password ipcamera2012 for example.
Firstly, goes to option of DDNS Settings on the administrator panel.
Secondly, select No-Ip as a server..
Thirdly, fill ipcamera as DDNS user, fill password ipcamera2012 as DDNS password, fill
ycxgwp.no-ip.info as DDNS domain and server URL, Then click save to make effect. The
camera will restart and to take the DDNS settings effective.
Fourthly, after the restart, login the camera, and go to option of Device Status on the
administrator panel, and check if the DDNS status is successful.
If failed, please double check if you have input the correct hostname, user name, and
password, and try to redo the settings.
NOTE: If you have set Third Party DDNS successfully ,the Domain Name will be invalid.
The Third Party DDNS and the Domain Name cannot work at the same time, the last time
you configured will take effect.
② Do port forwarding within the router
Example: The camera’s LAN IP address is http://192.168.8.100:2000 , Media port no. is
9200. Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or
named Virtue Server on some brands of router). Take Linksys brand router as an
example, Login the router, and goes to Applications & Gaming->Single Port Forwarding.
Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera within
the router showed as below.
Figure 6.30
Fill the Media Port no. of the
camera on the column of
External Port and Internal Port
Assign a
name as you
like here