Operation Manual

31-7-2014 49 ebode IPV38P2P
6.2.7 Mail Settings
If you want the camera to send emails when motion has been detected, here Mail will
need to be configured.
Figure 6.41
1) SMTP Server/ Port /Transport Layer Security: Enter SMTP server for sender. SMTP
port is usually set as 25. Some SMTP servers have their own port, such as 587 or 465,
and Transport Layer Security usually is None. If you use Gmail, Transport Layer Security
must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which
port you choose should be decided by which Transport Layer Security you select.
2) SMTP Username/ password: ID account and password of the sender email address
3) Sender E-mail: Mailbox for sender must support SMTP
4) Receiver: Mailbox for receiver need not support SMTP, you can set 4 receivers
5) Save: Click Save to take effect
6) Test: Click Test to see if Mail has been successfully configured.
Click Test to see if Mail has been successfully configured.