Operation Manual

31-7-2014 56 ebode IPV38P2P
Figure 6.52
6.5 Alarm
IP Camera supports Motion Detection Alarm, when the motion has been detected, it will
send emails or upload images to FTP.
Figure 6.53
To enable motion detection, follow the steps below:
1) Enable Motion detection
2) Sensitivity: It supports five modes: Lowest, Lower, Low, Medium and High. The higher
the sensitivity, the camera will be more easily alarmed. Select one motion sensitivity.
Step 3) Trigger interval: The interval time between two motion detections. Here supports
5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.
Step 4) Select the alarm indicator