Operation Manual

31-7-2014 64 ebode IPV38P2P
Manage the Cruise Track
There are two default cruise tracks: Vertical and Horizontal. Vertical: The camera will
rotate from up to down. Horizontal: The camera will rotate form left to right.
Add: Add one cruise track, then click save button. Delete: Select one cruise track and
delete it. Save: After you modify the Dwell time, you should click Save button to take
effect.
Example
How to do add cruise tracks ?
Firstly, Click Add button and enter a descriptive name to identify the cruise track.
Secondly: On the lower left of the page, you can see all preset points you have added.
Select one preset point and click Add button, you can see the preset point has been
added to the cruise track on the cruise track page. You need to add two or more preset
points to the cruise track.
Figure 6.68
Thirdly: Click OK button and the cruise track will take effect.
You can add other cruise track as the same method.
For example: I have added three preset points to the “track 1”, that means : When I
select the “track 1” on the surveillance window, the camera moves as the following track:
upright then Right Most last down left. You can add preset on the left of the surveillance
window.
The new added track name
.
1 Select one
preset point.
2 Click Add
button.
Here you can see the
preset point has been
added to one track. And
you can set the stay
time.