Operation Manual
31-7-2014    76     ebode IPV38P2P     
Figure 8.10 
If  you  allow  the  ActiveX  running,  but  still  could  not  see  living  video.  Please  change 
another port number to try. Don’t use port 88. 
Figure 8.11 
Make sure that the firewall/anti-virus software does not block the camera or ActiveX. If 
you could not see video, please shut down firewall/anti-virus software to try again. 
8.1.8 Can’t access IP camera in internet 
There are some reasons: 
1. ActiveX controller is not installed correctly 
2. The  port  which  camera  used  is  blocked  by  Firewall  or  Anti-virus  software.  Please 
change another port number and try again. 
3. Port forwarding is not successful 
Check these settings and make sure they are correct. 










