Operation Manual

31-7-2014 22 ebode IPV58P2P
1) Play: Click it to play the video of the camera
2) Stop: Click it to stop the video of the camera
3) Talk: Click the button and the icon will become to , then talk to the microphone
that connected with PC, people around the camera can hear your voice if the camera has
connected with audio output device. Click the icon again and stop talking.
4) Audio: Click the button and the icon will become to , you can hear the sound
around the camera if the camera has connected with other audio input device through
the Audio Input port of the camera, Click the icon again and stop audio.
5) Snap: Click it to make snapshot and it pop up a window which picture you snapshot,
right click in the window and save the picture to anywhere you want.
6) Record: Click the icon and the camera start recording, you can see a green dot in
the live window. Click again and stop recording. The default storage path is
C:\IPCamRecord. You can change the storage path: Go to Settings- >Record-> Storage
Location panel.
7) Full Screen: Click it to make full-screen, or you can double click the surveillance
screen to make full-screen. Double click again and exit full-screen.
Onscreen Mouse Control
Right click the mouse and you can adjust the full screen and Zoom up.
Figure 5.6
Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen.
Zoom up/down: Click it and the live view will be digital zoomed up, then click Zoom
Down and the live view back to original size.