User guide

13-3-2014 8 ebode TAKE6 IR/RF
the autosearch by pressing CHAN- (6) and by repeatedly
pressing this key return to the right code. Press -/-- (13) to
confirm.
Remark: if some functions of your equipment don’t work,
you need to try another code for your brand. The search
function starts after the last confirmed code. For example,
if it was 030, the search function starts at 031, and it will
keep on trying until the last possible code.
4.3 Automatic code search for all brands
When searching an unknown code, you can step through
the library automatically (AutoSearch). When your
equipment responds, you can stop the searching process
and store the code you found.
Note: as you can dedicate any appliance (TV, DVD,
STB...) to DVR, DVD, CD, STB, AUDIO or AUX key, you need
first to enter any 4-digit code for the kind of appliance
you wish to control (found in the code book), i.e.: If you
want to program a STB under the DVR key, enter ANY STB
code found in the code book and then follow the steps
below:
1. Turn on the device you want to control.
2. Press and hold S (8) until the LED indicator (2) lights
steadily. Release S button.
3. Press the mode button (4) that matches the equipment
you wish to control. The LED (2) blinks once.
4. Press CHAN+ (6) once. After a few seconds the remote
starts stepping through the code library (fast search, 1
code per second). When the device responds, you can
press CHAN+ (6) to switch to slow search (1 code per 3
seconds). You can step back by pressing CHAN- (6) (you
can step forward by pressing CHAN+ (6) in case you went
too far back). As soon as the device responds again,
press the -/-- key (13) to store the code you found.
4.4. Manual code search
Note: as you can dedicate any appliance TV, DVR, DVD,
STB, AUDIO, AUX, keys, you first need to enter any 4-digit
code for the kind of appliance you wish to control (found
in the code book), i.e.: If you want to program a STB
under the AUX key, enter ANY STB code found in the
code book and then follow the steps below:
1. Make sure your equipment is switched on.
2. Press and hold S (8) until the LED indicator lights steadily.
Release S
3. Press the mode key (4) that matches the equipment
you want to control (for example TV).
4. Press CHAN+ (6) repeatedly until the channel changes.
If you step past the correct code use CHAN- (6) to go
back to the right code.
5. When the equipment you want to control reacts, press -
/-- (13) to confirm the code.
Note: If your equipment doesn't have CHAN+ you can use
PLAY (DVR or DVD) (15) or POWER (1) key. The search
starts after the last registered code. If that was 030, the
search starts at 031 until the last possible code and then
goes from 000 to 029. Note: if certain functions of your
equipment can’t be controlled you will have to find a
different code for your brand.