User guide

16-10-2009 33 033000=15299
4.8 The FAV key
The FAV key allows you to program two specific channels and switch between
them with a single key-press. The two channels can be up to 4 key-presses
each and must be a minimum of 2. The first keypress must be a Mode key e.g.
TV with the following keys being up to 3 digits. To program the FAV key :-
a. Press and hold the S (8) button until the LED remains on (occurring after
approximately 2-3 seconds).
b. Release S (8) button.
c. Press and release the FAV (10) key.
d. Press and release desired Mode (4) key (e.g. TV) followed by the 1, 2 or 3
digit keys in the correct order for the first channel selection. The LED will flash
for each keypress.
e. Press and release the FAV (10) key.
f. Repeat Step "d" for the second device channel selection.
g. Press and release the FAV (10) key to store the channel selections. The LED
will turn off and remote returns to normal.
To select between the two channels, press and release the FAV key.
5. Felsökning
Fjärrkontrollen fungerar inte eller förlorar angivna koder
• Bekräfta med din original fjärrkontroll att utrustningen fungerar korrekt.
• Se till att du har tryck på rätt lägesknapp för din utrustning eller apparat som
du vill kontrollera.
• Om den listade koden inte fungerar, försök med AUTOMATISK SÖKNINGS
funktionen eller ange nästa kod för märket.
• Kontrollera att batterierna har korrekt polaritets position.
• Programmeringen av fjärrkontrollen kräver 2 CR2032 batterier (nya).
• Om lysdioden lyser permanent, betyder det generellt att det är nödvändigt
att byta batterierna.
• Återställ fjärrkontrollen till fabriksstandard.
Hur man återstället TAKE 6 fjärrkontrollen till fabriksstandard
• Tryck och håll ned S (8) tills lysdiodindikatorn (2) tänds, släpp S.
• Tryck och släpp 0 knappen (14) en gång.
• Tryck och håll ned S (8) tills lysdiodindikatorn (2) tänds, släpp S.
• Tryck och släpp S knappen (8).
• Lysdioden (2) släcks efter några sekunder.