User Manual

USERS MANUAL
EBS BILLY SHEEHAN ULTIMATE SIGNATURE DRIVE
www.ebssweden.com
ADVANCED CONTROL OPTIONS (as illustrated on next page)
BOOST FOOT SWITCH boosts the Drive gain level
when activated.
ACTIVE FOOT SWITCH Switches the pedal on or off.
REPLACEABLE OP-AMP CHIP - The chip can be removed and replaced
without need of soldering. Try a different 8-pin op-amp for a
different drive character. See EBS website for recommendations.
BOOST (trimmer) - Sets the level of the boost footswitch from +3 to
+10 d B
THR. (trimmer) - This control sets the threshold level for the
compressor. By turning this trimmer clockwise the threshold level
will be lower, i.e. the compressor will react at lower levels.
COMP (trimmer) - This control sets the amount of compression
when the compression mode switch is in the MID position.
NOTE: The factory setting for these trimmers is CENTER position.
POWER OPTIONS
DC POWER ADAPTOR We recommend the use of a DC Power Supply,
such as the EBS AD-9 Pro. The pedal handles 9-18 V DC, and
require a 2.1 mm pin center negative type of connector.
BATTERY The pedal can run on battery (not included). Use a 9V
alkaline type; 6LR61.