User Manual

USERS MANUAL
EBS BILLY SHEEHAN ULTIMATE SIGNATURE DRIVE
www.ebssweden.com
USING THE LOOPS
The Billy Sheehan Ultimate Signature Drive pedal gives you the option
to use additional effects to affect either the Clean or Drive channel
independently (the photo shows a reverb connected to the Drive Loop).
When using the loops, use an insert cable of a standard TRS type,
such as the EBS ICY-30, where the RING is the SEND signal, and the
TIP is the RETURN signal back to the pedal.
Note: You may also connect a mono plug directly into the insert jacks
without damaging the send output. Example: if your bass has separate
outputs for low and mid/high frequencies, you can use the Clean Loop
as an input for the lows and use the main input for the highs/mids.