Installation Instructions

A Cloth
B Screwdriver
C Silicone Caulking
* Tools and materials not included
(Figure 1 ) Apply silicone latex caulk to entire edge of vanity.
(Figure 2) Place vanity top on top of the vanity base.
Wipe-off any excess silicone latex caulk with a damp cloth and allow to dry.
Try not to move or slide vanity top for 24 hours.
(Figure 3 ) Finally, using a screwdriver, install the provided knobs onto the vanity.
Any questions or installation issues, please contact us by email at: [e-mail]