KODAK Smart Air Purifier AP550 DUAL FAN User Manual P.1 AP550_User Manual_V1.
TABLE OF CONTENTS 1. IMPORTANT SAFETY INSTRUCTIONS 4 8. GRANT ACCESS 50 2. PRODUCT PARTS OVERVIEW 10 9. TROUBLESHOOTING 58 3. CONTROL PANEL 11 10. SPECIFICATIONS 59 4. DISPLAY ICONS 12 11. EXCLUSION FROM COVERAGE 60 5. OPERATION INSTRUCTIONS (AT AIR PURIFIER) 14 12. FCC, IC AND CE REGULATIONS 62 6. MOBILE APP DISPLAY ICONS 22 13. WARNING 64 14. EC DECLARATION OF CONFORMITY 66 7. P.2 OPERATION INSTRUCTIONS (ON MOBILE APP) 24 P.
1. IMPORTANT SAFETY INSTRUCTIONS WARNING: BEFORE USING KODAK SMART AIR PURIFIER, PLEASE READ THROUGH ALL THE INSTRUCTIONS AND CAUTIONARY MARKINGS IN THE MANUAL AND ON THE AIR PURIFIER. PLEASE KEEP IT FOR FUTURE REFERENCE.
Caution • This air purifier is not a substitute for proper ventilation, regular vacuum cleaning, or use of an extractor hood or fan while cooking. • If the power socket used to power the air purifier has poor connections, the plug of the air purifier becomes hot. Make sure that you plug the air purifier into a properly connected power socket. • Always place and use the air purifier on a dry, stable, level, and horizontal surface.
• The air purifier is only intended for household use under normal operating conditions. • Suitable for dry location ONLY. Do not use outdoors or on wet surfaces and do not expose to water or rain. • If you need to move the air purifier, disconnect it from the power supply first. • Do not handle any part of the plug or machine with wet hands. • When moving the air purifier, do it slowly and do not push it rapidly. • Do not operate any machine with a damaged cord or plug.
2. PRODUCT PARTS OVERVIEW 3. CONTROL PANEL Reusable and Washable Filter Screen Button Power On/Off Back Cover Front Cover P.10 P.
4. DISPLAY ICONS 29˚C 89% Good 000-050 29˚C 89% Moderate 051-100 29˚C 89% Unhealthy 101-300 29˚C 89% Hazardous 301-500 Air Quality Rings Mode Display PM2.5 Reading Temperature Reading 29˚C 89% Humidity Reading Mode Display • Capital letter “A” displays at Mode display indicates the air purifier is in Auto mode. 29˚C 89 29˚C 89% 29˚C 89% P.
5. OPERATION INSTRUCTIONS ( AT AIR PURIFIER) Setup Power ON • Plug in the provided power adaptor on power socket, then plug in the DC plug into the DC jack located at bottom of the air purifier in order to power up. • Press the power button once to turn ON the air purifier. x1 Power OFF 3 sec P.14 P.
Change fan speed and auto mode Sleep mode • Press the LCD button to switch fan speed and auto mode. The change sequence is Fan Speed 1 -> Fan Speed 2 -> Fan Speed 3 -> Auto Mode -> Fan speed 1 -> … (loop) • Press the LCD button for 2 seconds, the air purifier will go to sleep mode. • For auto mode, the fan speed will change according to PM2.5 reading. If the PM2.5 reading is getting higher and higher, the fan speed will automatically and progressively increase. And if the PM2.
Cleaning Pairing mode • Press the LCD button and power button simultaneously for 2 seconds to enter pairing mode. 2sec KODAK Smart Home App • Pairing Flow 1. Select Air Purifier option to start pairing P.18 2. Tap continue after holding 2 buttons and hearing a beep sound 3. (For IOS only) Tap the Go to Settings to access to the Wi-Fi settings P.
4. (For IOS only) In the Wi-Fi settings, connect to Purifier-VXXXXXXXXX and return to the app P.20 5. Wait while pairing in progress 6. You may choose one of the recommended names or costume 7. Tap Continue after costume your name 8. Waiting while the app is setting up the names 9. Tap Done confirm the setup P.
6. MOBILE DISPLAY APP ICONS Quick Start Guide Move Left or Right to view the other air purifier Move up or down to show weather information Air Quality Indication Power On/ Off Auto Mode Fans Speed Sleep Mode Timer Sleep Mode Graph P.22 Schedule P.
7. OPERATION INSTRUCTIONS (ON MOBILE APP) • Sign up or Login KODAK Air Purifier app To download the KODAK Smart Home app: • On your mobile device, visit the App Store (iOS) or Google Play (Android) • Search for KODAK Smart Home app • Download and install the KODAK Smart Home app on your mobile device scan to install P.24 P.
• Create or Login to Your Account If this is your first KODAK Smart Home product, you will be asked to create an account. To set up an account: If you already have another KODAK Smart Home product installed, simply select LOGIN: • On your mobile device, open the KODAK Smart Home app • Tap SIGN UP • Follow the in-app instructions to create a new account P.26 P.
• Pairing 1. Select Add New Device P.28 2. Select Air Purifier option 3. Tap Continue after holding 2 buttons and hearing a beep sound 4. (For IOS only) Tap the Go to Settings to access to the Wi-Fi settings 5. (For IOS only) In the Wi-Fi settings, connect to Purifier-VXXXXXXXXX and return to the app P.
6. Wait while pairing in progress P.30 7. You may choose one of the recommended names or costume 8. Tap Continue after costume your name 9. Tap Done confirm the setup P.
• Observe A Filter Usage 1. Tap to open the side menu P.32 2. Tap Filter Usage 3. Filter Usage will be shown and when the bar is 100%, it means the device filter need to be cleaned P.
• Power On/Off 1. Tap P.34 to Power on 2. Tap to Power off P.
• Change Fans Speed 1. Tap to activate to fans speed P.36 2. Indicates that the fans speed is low 3. Indicates that the fans speed is middle 4. Indicates that the fans speed is high P.
• Set Auto Mode 1. Tap to activate the auto mode P.38 • Set Sleep Mode 2. Indicates that the auto mode is on 1. Tap to activate the sleep mode 2. indicates that the sleep mode is on P.
• Set a Sleep Mode Timer 1. Tap to activate the sleep timer P.40 2. A timer will pop up, tap confirm when finished to adjust the time • Delete a Sleep Mode Timer 1. Tap to show a sleep timer again 2. A timer will pop up, tap Delete to delete the timer P.
• Cleaning 1. P.42 will be shown when the device filter need to be cleaned, just tap on the screen ,then a cleaning flow will be shown 2. Follow the cleaning guide to clean the device filter 3. Cleaning Finished will be shown when the user has followed all steps of cleaning guide P.
• Graph 1. Tap to read the average PM2.5 data P.44 to read the 2. Tap average temperature data 3. Tap to read the average humidity data and to 4. Tap read the average humidity and average temperature data P.
• Schedule 1. Toggle to activate the schedule P.46 2. Press Starts or Ends to setup the duration 3. Press Confirm to activate the duration 4. Press Repeats to setup the time pattern P.
5. Press Confirm to setup the time pattern P.48 P.
8. GRANT ACCESS 8.1 Add Friend You may grant access to your family and friends using the feature called Grant Access which is located on the side menu of the Dashboard. 1. Click on “ ” which is located on the Dashboard P.50 2. Select Grant Access under Devices 3. Click on + which is located on the top right 4. Simply follow the instructions on the app and click Save to add a friend P.
9. TROUBLESHOOTING No LCD display, no light indicator • Check the power plug to see if it is properly plugged at your power socket. • Check the DC connector to see if it is properly plugged in the air purifier’s DC jack located under the air purifier. • Check the reusable filter to see if it is properly installed in the air purifier. The reusable filter should be at same level as the front panel if it is properly installed as shown. 10.
11. EXCLUSION FROM COVERAGE • Normal Wear and Tear: Regular maintenance, repair and replacement of parts and components due to normal wear and tear are not covered.
12. FCC, IC AND CE REGULATIONS Trade Name: Model: FCC IC HVIN KODAK AP550 / Kodak Air Purifier Duo / Kodak Smart Air Purifier AP550 DUAL FAN 2AT76-AP550 22297-AP550 AP550 FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
13. WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. Industry Canada This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1.
14.
The Kodak trademark, logo and trade dress are used under license from Kodak P.62 AP550_User Manual_V1.
