User's Manual
Copyright ©2012–2020,Chengdu Ebyte Electronic Technology Co.,Ltd
19
5.4.23 AT+BONDMAC add bond MAC address
Command
Response
Inquiry
AT+BONDMAC?
+OK=[sum][ [mac] [mac]…]
Set
AT+BONDMAC=[mac]
+OK:success
+ERR=[NUM]:error
Parameter
sum(HEX): sum of current bond MAC address;
mac(HEX):6bytes mac address;
Note
Take effect immediately, save when power off.
For example,
Inquiry:AT+BONDMAC?
Return: B 4F 4B 3D 03 CC 34 27 1A 0C D4 3D AC 82 16 0F 58 D2 D4 C3 07 0E C4
Set:41 54 2B 42 4F 4E 44 4D 41 43 3D CC 34 27 1A 0C D4
Return:+OK
5.4.24 AT+BONDDEL delete bond MAC address
Command
Response
Set
AT+BONDDEL=[mac]
+OK
+ERR=[NUM]
Parameter
mac:6 bytes mac address
Note
1、 Take effect immediately, save when power off
2、 Delete specific mac address
5.4.25 AT+SCAN scan
Command
Response
Inquiry
AT+SCAN?
+OK=[para]
Set
AT+SCAN=[para]
+OK:success
+ERR=[NUM]:error
Parameter
para(ASCII)
Description
0
Scan off
1
Scan on (default)
Note
1、 Take effect immediately, save when power off
2. If the current number of master connections has reached the maximum, then no longer start scanning;
3. Scan enable and disable take effect in roles other than the slave.