User's Manual

7. Electrostatic discharge warning
Modules will be damaged due to electrostatic discharge. It is recommended that all modules
should be handled under the following three preventive measures:
1Anti static measures must be followed, and the module cannot be held with bare hands.
2The module must be placed in a placement area that can prevent static electricity.
3The antistatic circuit at the high-voltage input or high-frequency input should be
considered in the product design.
Static electricity may result in subtle performance degradation to the failure of
the entire equipment. Due to very small parameter changes, the equipment may not meet
the value limit of its certification requirements, so the module will be more vulnerable
to damage.
8. Version update record
Version
number
Document
date
Update
content
V10
2020/7/27
  First release