User's Manual

Chengdu Ebyte Electronic Technology Co.,Ltd E07-900M10S User

Manual

 Please check the stability of power source, the voltage cannot fluctuate too much;

 Please make sure anti-static operation when installing and using, high frequency devices have electrostatic

susceptibility;

 Please ensure the humidity is within limited range, some parts are sensitive to humidity;

 Please avoid using modules under too high or too low temperature.

6.3 BER(Bit Error Rate) is high

 There are co-channel signal interference nearby, please be away from interference sources or modify

frequency and channel to avoid interference;

 The clock waveform on SPI is not standard, check whether there is interference on the SPI line, and the SPI bus line

should not be too long;

 Poor power supply may cause messy code. Make sure that the power supply is reliable;

 The extension line and feeder quality are poor or too long, so the bit error rate is high.

7 Production guidance

This product is a SMD module. When soldering the module, the soldering personnel must work in accordance with

the anti-static operation specification;

This product is an electrostatic sensitive product. If the module is not welded according to the specification, the

module may be permanently damaged.

8 E07 series

Model No.

Frequency

Tx power

Distance

Package

Antenna

dBm

E07-900M10S

CC1101

915M

1500

SMD

STAMP

E07-400M10S

CC1101

433M

1500

SMD

STAMP

All modules in E07 series can communicate with each other

9 Antenna Guide

9.1 Antenna recommendation

The antenna is an important role in the communication process. A good antenna can largely improve the communication

system. Therefore, we recommend some antennas for wireless modules with excellent performance and reasonable price.