Users Manual
Table Of Contents
- FCC Statement
- 1.Overview
- 2.Technical parameter
- 3. Mechanical characteristics
- 4. Operation mode
- 5.Transmission mode
- 6.Application function and instruction configurati
- 6.1 Function pin
- 6.2 Wireless remote configuration function
- 6.3 Touch link Functional application
- 6.4 Functional parameter description
- 6.5 HEX User instruction set
- 6.6 HEX Parameter description
- 6.6.1 System transmitting mode
- 6.6.2 Receiving data output mode
- 6.6.3 Network node type
- 6.6.4 Network state
- 6.6.5 Network PAN_ID
- 6.6.6 Network short address：
- 6.6.7 MAC address
- 6.6.8 Short address of father nodes
- 6.6.9 MAC address of father nodes
- 6.6.10 Network group number group
- 6.6.11 Network Channel
- 6.6.12 Transmitting Power
- 6.6.13 Buad rate
- 6.6.14 Sleep time
- 6.6.15 Storage time of father nodes
- 6.6.16 Centralized network opening time
- 6.6.17 Period of network reconnection after loss o
- 6.6.18 The maximum number of attempts to reconnect
- 6.6.19 Wireless remote configuration ID
- 6.6.20 User gpio parameter
- 6.6.21 User pwm parameter
- 6.6.22 User adc parameter
- 6.6.23 Configure all network parameters
- 6.6.24 Configure all network parameters
- 6.6.25 Number of end-devices of the parent node
- 6.6.26 Parent node's end-device list
- 6.6.27 Configure the delayed printing time of AUX
- 6.6.29 Configure endpoint information
- 6.6.30 Set Link key of trust center
- 6.6.31 firmware version number
- 7.Quick start
- 8. Secondary development design reference
- 9.FAQ
- Revision history
- About us
Chengdu Ebyte Electronic Technology Co.,Ltd. E180-ZG120B User Manual
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co.,Ltd.
19
Read data output mode
27
Send
：
FE 01 27 FF
Return
：
FB 27 out_mode
Send
：
FE 01 27 FF
Return
：
FB 27 00
Read centralized network
open time
28
Send： FE 01 28 FF
Return： FB 28 net_opentime
Send： FE 01 28 FF
Return： FB 28 FF
The parent node loses the
network reconnection
period
29
Send： FE 01 29 FF
Return： FB 29
net_rejoinperiod
Send： FE 01 29 FF
Return： FB 29 05
The maximum number of
times the parent node lost
network reconnection
30
Send： FE 01 30 FF
Return： FB 30
net_rejoincount
Send： FE 01 30 FF
Return： FB 30 05
Read wireless
configuration ID
31
Send： FE 02 31 FF
Return： FB 31 header
Send： FE 02 31 FF
Return： FB 31 A8 8A
Read all device data
FE
Send
：
FE 2F FE FF
Return
：
FB FE all_info
Send
：
FE 2F FE FF
Return
：
FB FE 03 02 FE 5B
F6 FA 1F 1C 21 FE FF 57
B4 14 00 00 0C 46 0C FE
FF 9F FD 90 01 0B 0A 09
54 00 00 00 0A 1C 21 FE FF
57 B4 14 02 00 FF 05 05 A8
8A
Read remote/local GPIO level
20
Send
：
FE 03 20 GpioId FF
Return
：
FB 20 GpioId In/Out
level
Send
：
FE 03 20 00 FF
Return
：
FB 20 00 01 01
Read remote/local PWM state
21
Command： FE 06 21 PWMId
FF
Return： FB 21 PWMId
start/stop
Period Period duty
duty
Send： FE 06 21 00 FF
Return： FB 21 00 01
0A 3E 63 50
Read local /remote ADC state
22
Command：FE 03 22 adcid FF
Return： FB 22 adcid voltage1
voltage2
Send： FE 03 22 00 FF
Return： FB 22 00 0C E4
Number of end-device
nodes reading the parent
node
32
Command： FE 01 32 FF
Return： FB 32 child_count
Send： FE 01 32 FF
Return： FB 32 0A
Read the parent node's
end-device node schedule
33
Command： FE 0E 33 FF
Return：FB 33 index dev_type
Short_Addr Mac_Addr
Send： FE 0E 33 FF
Return： FB 33 00 03 FE 5B
0A 1C 21 FE FF 57 B4 14
Read the firmware
version number
34
Command
：
FE 03 34 FF
Return
：
FB 34 FirmwareVersion
Send
：
FE 03 34 FF
Return
：
FB 34 82 69 01
Read the delayed printing
time of AUX wake up
35
Send： FE 01 35 FF
Return： FB 35 AUX_delaytime
Send： FE 01 35 FF
Return： FB 35 04