Users Manual
Table Of Contents
- FCC Statement
- 1.Overview
- 2.Technical parameter
- 3. Mechanical characteristics
- 4. Operation mode
- 5.Transmission mode
- 6.Application function and instruction configurati
- 6.1 Function pin
- 6.2 Wireless remote configuration function
- 6.3 Touch link Functional application
- 6.4 Functional parameter description
- 6.5 HEX User instruction set
- 6.6 HEX Parameter description
- 6.6.1 System transmitting mode
- 6.6.2 Receiving data output mode
- 6.6.3 Network node type
- 6.6.4 Network state
- 6.6.5 Network PAN_ID
- 6.6.6 Network short address：
- 6.6.7 MAC address
- 6.6.8 Short address of father nodes
- 6.6.9 MAC address of father nodes
- 6.6.10 Network group number group
- 6.6.11 Network Channel
- 6.6.12 Transmitting Power
- 6.6.13 Buad rate
- 6.6.14 Sleep time
- 6.6.15 Storage time of father nodes
- 6.6.16 Centralized network opening time
- 6.6.17 Period of network reconnection after loss o
- 6.6.18 The maximum number of attempts to reconnect
- 6.6.19 Wireless remote configuration ID
- 6.6.20 User gpio parameter
- 6.6.21 User pwm parameter
- 6.6.22 User adc parameter
- 6.6.23 Configure all network parameters
- 6.6.24 Configure all network parameters
- 6.6.25 Number of end-devices of the parent node
- 6.6.26 Parent node's end-device list
- 6.6.27 Configure the delayed printing time of AUX
- 6.6.29 Configure endpoint information
- 6.6.30 Set Link key of trust center
- 6.6.31 firmware version number
- 7.Quick start
- 8. Secondary development design reference
- 9.FAQ
- Revision history
- About us
Chengdu Ebyte Electronic Technology Co.,Ltd. E180-ZG120B User Manual
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co.,Ltd.
20
external MCU serial port
in wireless receiving state
Read UART wake up
keep time
36
Send： FE 01 36 FF
Return： FB 36 Uart_holdtime
Send： FE 01 36 FF
Return： FB 36 64
Read port info.
37
Send： FE 05 37 FF
Return： FB 37 Endpoint_info
Send： FE 05 37 FF
Return： FB 37 01 FE B0
05 04
Read link key of trust
center
38
Send： FE 10 38 FF
Return： FB 10 TrustCentLinkKey
Send： FE 10 38 FF
Return： FB 38
5A 69 67 42 65 65 41 6C
6C 69 61 6E 63 65 30 39
6.5.3 Configuration instruction set
Configure device type
Send
：
FD 01 01 dev_type FF
Return
：
FA 01
Send
：
FD 01 01 03 FF
Return
：
FA 01
Configure PAN_ID
Send
：
FD 02 03 pan_id FF
Return
：
FA 03
Send
：
FD 02 03 FE 5B FF
Return
：
FA 03
Configure the network
group number
Send：FD 01 09 group FF
Return：FA 09
Send：FD 01 09 01 FF
Return：FA 09
Configuring
communication channel
Send：FD 01 0A channel FF
Return：FA 0A
Send：FD 01 0A 0B FF
Return：FA 0A
Configure transmit power
Send：FD 01 0B txpower FF
Return：FA 0B
Send：FD 01 0B 0A FF
Return：FA 0B
Configure serial port baud rate
Send：FD 01 0C baud FF
Return：FA 0C
Send：FD 01 0C 09 FF
Return：FA 0C
Configure sleep time
(end-device valid)
Send
：
FD 01 0D sleep_time FF
Return
：
FA 0D
Send
：
FD 01 0D 54 FF
Return
：
FA 0D
Configure the target
network short address
Send
：
FD 02 23 dec_addr FF
Return
：
FA 23
Send
：
FD 02 23 00 00 FF
Return
：
FA 23
Configure the target
network group number
Send：FD 01 24 netid FF
Return：FA 24
Send：FD 01 24 00 FF
Return：FA 24
Configure target long
address
Send：FD 08 25 dec_mac FF
Return：FA 25
Send：FD 08 25 0A 1C 21
FE FF 57 B4 14 FF
Return：FA 25
Configure system send
mode
Send：FD 01 26 mode FF
Return：FA 26
Send：FD 01 26 02 FF
Return：FA 26
Configure the data output
mode
Send：FD 01 27 mode FF
Return：FA 27
Send：FD 01 27 00 FF
Return：FA 26
Configure to open
centralized network time
Send
：
FD 01 28 time FF
Return
：
FA 28
Send
：
FD 01 28 FF FF
Return
：
FA 28
Configure the period of
rejoin after the end-device
Send
：
FD 01 29 time FF
Return
：
FA 29
Send
：
FD 01 29 05 FF
Return
：
FA 29