Users Manual
Table Of Contents
- FCC Statement
- 1.Overview
- 2.Technical parameter
- 3. Mechanical characteristics
- 4. Operation mode
- 5.Transmission mode
- 6.Application function and instruction configurati
- 6.1 Function pin
- 6.2 Wireless remote configuration function
- 6.3 Touch link Functional application
- 6.4 Functional parameter description
- 6.5 HEX User instruction set
- 6.6 HEX Parameter description
- 6.6.1 System transmitting mode
- 6.6.2 Receiving data output mode
- 6.6.3 Network node type
- 6.6.4 Network state
- 6.6.5 Network PAN_ID
- 6.6.6 Network short address：
- 6.6.7 MAC address
- 6.6.8 Short address of father nodes
- 6.6.9 MAC address of father nodes
- 6.6.10 Network group number group
- 6.6.11 Network Channel
- 6.6.12 Transmitting Power
- 6.6.13 Buad rate
- 6.6.14 Sleep time
- 6.6.15 Storage time of father nodes
- 6.6.16 Centralized network opening time
- 6.6.17 Period of network reconnection after loss o
- 6.6.18 The maximum number of attempts to reconnect
- 6.6.19 Wireless remote configuration ID
- 6.6.20 User gpio parameter
- 6.6.21 User pwm parameter
- 6.6.22 User adc parameter
- 6.6.23 Configure all network parameters
- 6.6.24 Configure all network parameters
- 6.6.25 Number of end-devices of the parent node
- 6.6.26 Parent node's end-device list
- 6.6.27 Configure the delayed printing time of AUX
- 6.6.29 Configure endpoint information
- 6.6.30 Set Link key of trust center
- 6.6.31 firmware version number
- 7.Quick start
- 8. Secondary development design reference
- 9.FAQ
- Revision history
- About us
Chengdu Ebyte Electronic Technology Co.,Ltd. E180-ZG120B User Manual
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co.,Ltd.
21
node loses the parent node.
The maximum number of
rejoins after the end-device
node loses the parent node
Send：FD 01 30 time FF
Return：FA 30
Send：FD 01 30 05 FF
Return：FA 30
Configuring the wireless
remote configuration ID
Send：FD 02 31 header FF
Return：FA 31
Send：FD 02 31 A8 8A FF
Return：FA 31
Configure all network
parameters
Send：FD 1A FE all_info FF
Return：FA FE
Send：FD 1A FE 03 FE 5B
01 0B 0A 09 54 00 00 00 0A
1C 21 FE FF 57 B4 14 02 00
FF 05 05 A8 8A FF
Return：FA FE
Configure Remote/Local
GPIO Input and Output
Status
Send：FD 03 20 GpioId In/Out level FF
Return：FA 20
Send：FD 03 20 00 01 01 FF
Return：FA 20
Configure remote/local
PWM status
指令：
FD 06 21 PwmId start/stop
Period1 Period2 duty1 duty2 FF
Return
：
FA 21
Send
：
FD 06 21 00 FF 03 65
02 48 FF
Return
：
FA 21
Device restart
Send
：
FD 00 12 FF
Return
：
FA 12
Send
：
FD 01 12 FF
Return
：
FA 12
Restore factory settings
Send：FD 00 13 FF
Return：FA 13
Send：FD 01 13 FF
Return：FA 13
Read the delayed printing time
of AUX wake up external
MCU serial port in wireless
receiving state
Send：FD 01 35 AUX_delaytime FF
Return：FA 35
Send：FD 01 35 04 FF
Return：FA 35
Read UART wake up keep
time
Send：FD 01 36 Uart_holdtime FF
Return：FA 36
Send：FD 01 36 64 FF
Return：FA 36
Read port info.
Send：FD 05 37 Endpoint_info FF
Return：FA 37
Send：FD 05 37 01 FE B0
05 04 FF
Return：FA 37
Read link key of trust center
Send
：
FD 10 38 TrustCentLinkKey FF
Return
：
FA 38
Send
：
FD 10 38
5A 69 67 42 65 65 41 6C
6C 69 61 6E 63 65 30 39
FF
Return
：
FA 38
6.5.4 Network operation instruction set
Open network
Send：F5 01 40 01 FF
Return：FC 40 00
Send：F5 01 40 01 FF
Return：FC 40 00
Leave Network
Send：F5 01 40 02 FF
Return：FC 40 00
Send：F5 01 40 02 FF
Return：FC 40 00
Create network
Send：F5 01 40 03 FF
Return：FC 40 00
Send：F5 01 40 03 FF
Return：FC 40 00