Users Manual

Chengdu Ebyte Electronic Technology Co.,Ltd. E180-ZG120B User Manual
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co.,Ltd.
23
0x00
no network
0x01
Currently joining the network
0x02 joined the network
0x03 A network exists, but the parent node is lost
0x04 Leaving the current network
6.6.5 Network PAN_ID
pan_id
：
0x0000
～
0xFFFE
fixed network PAN_ID
0xFFFF
stochastic network
PAN_ID
PANID Parameters need to be configured before setting up or joining the network.
6.6.6 Network short address：
Short_Addr
：
2 Byte Address randomly assigned by coordinator
6.6.7 MAC address
Mac_Addr
：
8 Byte Factory unique physical address is fixed
6.6.8 Short address of father nodes
Coor_shortAddr
：
2 Byte Short address of the parent node of the current node, If coordinator, should be 0x0000
6.6.9 MAC address of father nodes
Coor_Mac_Addr： 8 Byte The parent node's long address of the current node
6.6.10 Network group number group
group
：Group number range 0x01~0xFF (default 0 means no group system default broadcast)
6.6.11 Network Channel
channel
Channel range 0x0B(11)~
0x1A
(26) (default 11 channels)
channel
The parameters need to be configured before entering the network or establishing a network.
6.6.12 Transmitting Power
txpower
Transmitting power level
txpower
：Parameters need to be established before the network or before joining the network.
6.6.13 Buad rate
Baud rate parameter baud comparison table:
Buad
Baud rate
Buad
Baud rate