Users Manual

Chengdu Ebyte Electronic Technology Co.,Ltd. E180-ZG120B User Manual
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co.,Ltd.
26
adcid
：
ADC
channel
ID
Channel
ID
ADC GPIO Port
0x00
VDD
Power supply voltage
detection
0x01
PC8 Port
0x02
PC9 Port
0x03
PC10 Port
0x04
PC11 Port
Voltage
： Read ADC channel voltage value（
mV
）
Detectable range
0x0000
～
0x0E74
（
0
～
3700
）
voltage 1 Indicates high 8 digits
voltage 2 Indicates lower 8 bits
If
Read value：
voltage =0x0C voltage =0xE4
Then voltage：voltage =0x0CE4
Note: If the power supply voltage is the highest 3.7V, the detection range of the ADC can reach 3.7V.
6.6.23 Configure all network parameters
all_info：FD 1A FE 03 FE 5B 01 0B 0A 09 54 00 00 00 0A 1C 21 FE FF 57 B4 14 02 00 FF 05 05 A8 8A FF
Node type 03；Network PANID FE 5B； Network group number 01； Channel 0B；Transmitting power 0A；Baud rate 09；
Sleep time 54； Target network short address 00 00；Target network group number 00； Target long address 0A 1C 21 FE FF 57
B4 14；System transmitting mode 02；Data output mode 00；Network open time FF； rejoin period 05； rejoin times 05； Wireless
ID A8 8A；
6.6.24 Configure all network parameters
all_info：FB FE 03 02 FE 5B F6 FA 1F 1C 21 FE FF 57 B4 14 00 00 0C 46 0C FE FF 9F FD 90 01 0B 0A 09 54 00 00 00 0A 1C
21 FE FF 57 B4 14 02 00 FF 05 05 A8 8A
Node type 03； Network status 02； Network PANID FE 5B; Local network short address F6 FA； Local MAC
address 1F 1C 21 FE FF 57 B4 14；Parent node network short address 00 00； Parent node MAC address 0C 46 0C FE FF 9F FD
90； Network group 01；Channel 0B；Transmitting power 0A；Baud rate 09；sleep time 54；Target network short address 00 00；
Target network group 00；Target long address 0A 1C 21 FE FF 57 B4 14；System transmitting mode 02； Data output mode 00；
Network open time FF；rejoin period 05； rejoin times 05；Wireless ID A8 8A；
6.6.25 Number of end-devices of the parent node
Child_count:Refers to the number of end-device nodes currently managed by the coordinator or router, and manages
up to 50 end-device devices.
6.6.26 Parent node's end-device list
index: Indicates the serial number of the end-device node, the range is from 0 to child_count-1, 1 byte
dev_type
：
device type of
end-device node，
1 byte
Short_Addr
：Network short address of the end-device node，
2 bytes
Mac_Addr
：MAC address of the end-device node，
8 byte
After receiving the instruction "FE 0E 33 FF" to read the end-device list, the coordinator or router node will print
out the end-device node information every 50ms interval according to the sequence number (index) of the end-device