Users Manual
Table Of Contents
- FCC Statement
- 1.Overview
- 2.Technical parameter
- 3. Mechanical characteristics
- 4. Operation mode
- 5.Transmission mode
- 6.Application function and instruction configurati
- 6.1 Function pin
- 6.2 Wireless remote configuration function
- 6.3 Touch link Functional application
- 6.4 Functional parameter description
- 6.5 HEX User instruction set
- 6.6 HEX Parameter description
- 6.6.1 System transmitting mode
- 6.6.2 Receiving data output mode
- 6.6.3 Network node type
- 6.6.4 Network state
- 6.6.5 Network PAN_ID
- 6.6.6 Network short address：
- 6.6.7 MAC address
- 6.6.8 Short address of father nodes
- 6.6.9 MAC address of father nodes
- 6.6.10 Network group number group
- 6.6.11 Network Channel
- 6.6.12 Transmitting Power
- 6.6.13 Buad rate
- 6.6.14 Sleep time
- 6.6.15 Storage time of father nodes
- 6.6.16 Centralized network opening time
- 6.6.17 Period of network reconnection after loss o
- 6.6.18 The maximum number of attempts to reconnect
- 6.6.19 Wireless remote configuration ID
- 6.6.20 User gpio parameter
- 6.6.21 User pwm parameter
- 6.6.22 User adc parameter
- 6.6.23 Configure all network parameters
- 6.6.24 Configure all network parameters
- 6.6.25 Number of end-devices of the parent node
- 6.6.26 Parent node's end-device list
- 6.6.27 Configure the delayed printing time of AUX
- 6.6.29 Configure endpoint information
- 6.6.30 Set Link key of trust center
- 6.6.31 firmware version number
- 7.Quick start
- 8. Secondary development design reference
- 9.FAQ
- Revision history
- About us
Chengdu Ebyte Electronic Technology Co.,Ltd. E180-ZG120B User Manual
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co.,Ltd.
28
Take effect once restart
Note: Only the connected device holding the same link key (LinkKey) as the trust center (coordinator) can it connect to
the network of the trust center (coordinator), and the trust center (coordinator) transmits the network key to the connected
device , The connected device completes the process of joining the network to obtain the network key for normal
communication.
6.6.31 firmware version number
Firmware_version: EF 32 02
EF 32 means EFR32 chip
02 means firmware version number
7.Quick start
7.1 Quickly build ZigBee network
Quickly and easily establish a ZigBee network via PC software. The steps are as follows:
（1）Connect Zigbee ad hoc module via USB to UART converter, Open host computer software “ E180-ZG120B-Setting ” , select
Com port and set baud rate as 115200(default), then open port.
（2） After the serial port is opened, first click “Enter Configuration Mode”, the message box prompts “Enter the
configuration status successfully, read parameter successfully”. The main network parameters include: the node type
defaults to the end-device, channel 11(default), PAN ID random (default), transmit power is 10 (default).