Users Manual
Table Of Contents
- FCC Statement
- 1.Overview
- 2.Technical parameter
- 3. Mechanical characteristics
- 4. Operation mode
- 5.Transmission mode
- 6.Application function and instruction configurati
- 6.1 Function pin
- 6.2 Wireless remote configuration function
- 6.3 Touch link Functional application
- 6.4 Functional parameter description
- 6.5 HEX User instruction set
- 6.6 HEX Parameter description
- 6.6.1 System transmitting mode
- 6.6.2 Receiving data output mode
- 6.6.3 Network node type
- 6.6.4 Network state
- 6.6.5 Network PAN_ID
- 6.6.6 Network short address：
- 6.6.7 MAC address
- 6.6.8 Short address of father nodes
- 6.6.9 MAC address of father nodes
- 6.6.10 Network group number group
- 6.6.11 Network Channel
- 6.6.12 Transmitting Power
- 6.6.13 Buad rate
- 6.6.14 Sleep time
- 6.6.15 Storage time of father nodes
- 6.6.16 Centralized network opening time
- 6.6.17 Period of network reconnection after loss o
- 6.6.18 The maximum number of attempts to reconnect
- 6.6.19 Wireless remote configuration ID
- 6.6.20 User gpio parameter
- 6.6.21 User pwm parameter
- 6.6.22 User adc parameter
- 6.6.23 Configure all network parameters
- 6.6.24 Configure all network parameters
- 6.6.25 Number of end-devices of the parent node
- 6.6.26 Parent node's end-device list
- 6.6.27 Configure the delayed printing time of AUX
- 6.6.29 Configure endpoint information
- 6.6.30 Set Link key of trust center
- 6.6.31 firmware version number
- 7.Quick start
- 8. Secondary development design reference
- 9.FAQ
- Revision history
- About us
Chengdu Ebyte Electronic Technology Co.,Ltd. E180-ZG120B User Manual
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co.,Ltd.
3
7.3.1 Unicast test
..................................................................................................................................................
33
7.3.1.1 Unicast between end-device and coordinator in the form of short address
......................................
33
7.3.1.2 Unicast in long address form between end-device and coordinator
.................................................
34
7.3.2 Multicast testing
..........................................................................................................................................
36
7.3.3 Broadcast test
...............................................................................................................................................
37
8. Secondary development design reference................................................................................................................ 39
8.1 Mechanical dimensions and pin definitions
...................................................................................................
39
8.2 Schematic design
.............................................................................................................................................
41
8.3 Development
...................................................................................................................................................
41
8.4 Hardware design
.............................................................................................................................................
41
8.5 Software Programming
...................................................................................................................................
42
9.FAQ............................................................................................................................................................................ 43
9.1 Communication range is too short
..................................................................................................................
43
9.2 Module is easy to damage
...............................................................................................................................
43
9.3 Bit error rate is too high
..................................................................................................................................
43
Revision history............................................................................................................................................................ 43
About us........................................................................................................................................................................ 44