User's Manual

Chengdu Ebyte Electronic Technology Co,;Ltd E70-915T30S user manual

5.6.3 Configuration procedure of module

 Only happened when power-on resetting or exiting sleep mode

6. Operating Mode

The table below shows the status of corresponding modes: 

Mode (0-7)

Mode introduction

Remark

0 RSSI mode

UART opens. Wireless closes and

transmission is unavailable.

Module outputs RSSI value each

100ms through UART

1 Continuous mode

UART opens. Wireless closes and

continuous transparent transmission is

available.

Air data rate can be adjusted

automatically according to baud rate.

The baud rate must be same on both

receiver and transmitter. It is

applicable for high speed continuous

data transmission.

2 Sub-package mode

UART opens. Wireless closes and

sub-package transparent transmission is

available.

Air data rate and baud rate can be

adjusted separately. It is applicable for

data packet transmission.

3 Configuration mode

UART opens. Wireless closes and parameter

can be configured.

Baud rate is fixed as 9600 8N1.

4 WOR mode

UART opens. Wireless closes and

subpackage transparent transmission is

available.

Receiving is not available under this

mode. Preamble code will be added

proactively before transmission to

wake up the receiver under mode 6.

5 Configuration mode (Same

as Mode 3)