User Manual EC-1530 All-in-one Touch POS Terminal
Table of Contents Chapter I: Overview ....................................................................................... 2 1.1.The Structure of the Manual ............................................................... 2 1.2. Safety Information： ........................................................................... 2 1.3 Electromagnetic compatibility statement:......................................... 4 Chapter II: Installation Guide ................................................................
Chapter I: Overview Dear customer： Thank you for purchasing the EC Line All - In One touch POS devices, we are committed to continuously improve the product quality and provide better after-sales service. In order to take full advantage of our devices, we strongly recommend that you take the time to read this manual before diving into software solution. 1.1 The Structure of the Manual This manual is divided into parts and chapters in order to help you better focus on the key topics.
Tunr off the power before connecting any devices (except USB device) to the terminal. Do not attempt to open the chassis .You may be hurt by electric shock.For service,call your place of purchase. Please do not leave any item or liquid into the product, do not place any objects into the ventilation holes of this product, it may cause short-circuit of the internal components and cause a fire or electric shock.
When the following occurs: Liquid penetrate into the body of POS machines POS machines accidental damage POS machines produces a burning smell POS machines shows sudden abnormal Immediately disconnect the cash register power supply, unplug the power cord, and immediately contact a qualified service technician to deal with. 1.
2.2 The rear panel I/O signs and description: AT the rear panel of the POS device you will see a row of the external device connection interface, such as: power outlet, the parallel connector, serial socket, USB interface, detailed as follows: POWER key: turn on/off the pos MOUSE: To connect mouse device KB: To connect the keyboard device LPT: 25DB parallel port, external printing, or other communications equipment VGA: VGA signal output interface COM 1.3.4.5.
Chapter III: Instructions for use 3.1 Motherboard BIOS settings: The POS device has a BIOS (Basic Input Output System) chip on the motherboard. Every time you start the POS devices, the system will first run the BIOS self - test program, to check the main components of the system to ensure it is working properly.
To load the last set of values To load the safest value To load the optimal value To store settings and exit the CMOS SETUP program Step 1: Select Load Default Settings to restore optimized default settings CMOS Setup Utility- copyright (c)1985-2008 BIOS Setup Utility- copyright (c)1985-2008 Main Advanced chipset Boot Secruity Save&Exit ↑↓→←:Move +/-:Value Enter:Select F10:Save and Exit F1: General Help F9: Load Ddfault Settings Esc:Exit Step 2: Select “main “ Standard CMOS Features Bi
WARNING: setting wrong values in the below sections may cause system to Malfunction Advanced setup CPU Configuration IDE Configuration Configure CPU USB Configuration COM/LPT Configuration Hardware monitor Power management ↑↓→←: Move +/-:Value Enter : select F10:Save and Exit F9 : load Defaults Settings F1:General Help Esc : Exit Step 4: Select Boot Boot Configuration Bootup NumLock State On Display Logo Dislabled Boot Option Priorities SATA:ST3800….
Step 6: Select the menu unit exit North Bridge Configuration Memory Frequency 800MHZ Help Ttem Total Memory Share Memory Size DVMT Mode Select DVMT/FIXED Memory Configure North Bridge features 2048MB 8MB DVMT Mode 256MB South Bridge Configuration HD Audio controller USB Function On board LAN2 Controller LAN Boot Rom Enlabled Enlabled Auto Dislabled ↑↓→←: Move +/-:Value Enter : select F10:Save and Exit F9 : load Defaults Settings F1:General Help Esc : Exit Step7: Select the Save& exit Exit option Sav
Step 2: Double-click the installation as the following figure shows, click Next to proceed to the next installation.
Step 4: Tick “install PS / 2 interface driver” and click Next to proceed installation. Step 5: If the touch interface is RS232, tick “install RS232 interface driver” and click Next to proceed installation.
Step 6: When choosing the calibrations, select NONE, click Next to proceed installation.
Step 8: When there are two or more touch screen, please tick “Support multimonitor system”. Step 9: Select the destination location to store the driver, the default path is C: \ Program Files \ eGalaxtouch; we use the default path here, click Next to proceed to installation.
Click Next to proceed to installation Step 10: Check the projects to create a desktop shortcut icon in the following figure 14
After install the driver successfully, identify the USB controller card and RS232 control card as the following two figures shows.
Related touch function setting Touch calibration 16
Touch device line test Touch screen setting 17
Touch device edge correction setting Touch device hardware information display 18
Chapter IV: Common Faults and exclusion 1. POS device does not boot If the POS devices cannot boot after repeated pressing of the power switch (POWER) when connect to the power, the POS device power light remains off, the fan does not operate, and the BIOS beeping is not heard.
4) If the POS device does not boot after a sudden power failure or illegal shutdown, unplug the adapter from the POS device, and press the power button (POWER) for several times, then plug the adapter and boot again. (5)If the adapter light blinks or go off, unplug the adapter immediately and do not plugged in again, then contact with our products service center. 2.
the driver installation instructions "); (4) Check the IP address is set correctly (according to the "Driver Installation Instructions"), If you do not know how to. Please apply "Obtain an IP address automatically". (5) Not available to access internet or the network speed is very slow, it may be too many pages opened or affected by viruses, so please clean the virus immediately. 5. Mouse or keyboard is not working.
also recommend you to do this after change the monitor resolution or refresh rate. When running the calibration, press the center of calibration point to avoid in accuracy. 9. The cursor moves opposite to the touch movement (1) Please run the 4/9/25 point calibration; (2) The touch screen driver is not installed properly, reinstall the driver. 10. The cursor fixed at the edge of LCD, or pulse in a fixed position (1) The touch region of the screen has been suppressed by something.
(1) Make sure the printer is normal; (2) Check the printer and POS devices are connected; (3) Check the driver of printer is installed; (4) Try to find the printer hardware in the POS device properties, if found, please re-install the correct printer driver; (5) In the POS device properties if the printer hardware is not found, please re-check printers and POS device is connected and the printer is available. (6) If the above steps do not resolve this problem can only reinstall the operating system. 14.
