User`s manual

EC-80320 User’s Manual
- 37 -
ESC j Print and feed paper conversely
Format: ASCII: ESC j n
Decimal: 27 106 n
Hex: 1B 6A n
Description:
Print the content in the buffer and feed paper n*vertical unit inch conversely.
n=0～255. Horizontal or vertical motion unit is specified by GS P command.
Note: This function is only for Micro-adjustment. If the distance the paper feeding is over
long, which may cause the paper jammed or deviating from print roller.
ESC p m t1 t2 Generate pulse
Format: ASCII: ESC p m t1 t2
Decimal: 27 112 m t1 t2
Hex: 1B 70 m t1 t2
Description:
Printer output pulse, whose width specified by t1 and t2. On time is t1*2ms，low ist2*2ms.
m=0,48,1,49。
ESC t Select code page
Format: ASCII: ESC t n
Decimal: 27 116 n
Hex: 1B 74 n
Description:
Selects a code page through n as follows:
n=0 PC437;n=1 PC437;n=2 PC850;n=3 PC860;n=4 PC863;
n=5 PC865;n=16 WPC1252;n=17 PC866;n=18 PC852;n=19 PC858;
ESC { Turn on/off upside-down printing mode
Format: ASCII: ESC { n
Decimal: 27 123 n
Hex: 1B 7B n
Description:
When the LSB of n is 0, upside-down printing mode is turn off.
When the LSB of n is 1, upside-down printing mode is turn on.
FS ! Select Chinese character mode
Format: ASCII: FS ! n
Decimal: 28 33 n
Hex: 1C 21 n
Description: