User`s manual

EC-80320 User’s Manual
- 4 -
2. Connect the other end of the cable to the host. Tighten the connector screws.
3. This printer can carry out a network printing through connecting parallel interface to network
print server, which you can use are PS-1206, SX-110 and SX-3100 which have been
validated.
2.3.2 Connecting the Serial Interface Cable (Optional)
1. Make sure the Host and the printer are both turned off, connect the serial interface cable to the
connector on the rear panel of the printer. Tighten the connector screws as shown in Fig 2-3.
2. Connect the other end of the cable to the host’s serial connector and tighten the connector
screws.
2.3.3 Connecting the USB Interface Cable
1. Plug the USB cable A end (square shape) into the printer's USB connector as shown in Fig2-4.
2. Plug the other end of the USB cable (flat) to the computer’s USB connector.。
Fig2-3 Connecting the serial interface cable
Fig 2-2 Connecting the parallel interface cable
Serial Interface
Serial Cable
Screws
Parallel Interface Parallel Cable
Clip Wires