Installation Guide

Phone: [phone] | Email: [e-mail] | Address: 315 - A Industrial RD Summerville, SC 29483
PLEASE NOTE: THIS MANUAL IS SUBJECT TO CHANGE AT ANY TIME, TO ENSURE THIS MANUAL IS UP TO DATE PLEASE VISIT OUR HELP DESK
AT WWW.ECCOTEMP.COM FOR ALL OF OUR PRODUCT MANUALS.
7
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locater: Eccotemp.com/locater
INSTALLATION LOCATION & METHOD
Fixed installation on the wall
Locate an appropriate place on a section of wall that meets all safety and installation requirements
1)
Front and back of the water heater
2)
Fig. 1
Remove (4) screws and washers from the unit to free the front cover. Carefully lift the front cover
off the unit a few inches. Disengage the ribbon cable connecting the front cover LCD panel to the
main control board of the unit. Remove cover completely.
Please note: If LCD connection cable cannot be disengaged, simply set the front cover aside and keep
the cable connected.
Fig. 2