Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 PLEASE NOTE: THIS MANUAL IS SUBJECT TO CHANGE AT ANYTIME, TO ENSURE THIS MANUAL IS UP TO DATE PLEASE VISIT OUR HELP DESK AT WWW.ECCOTEMP.COM FOR ALL OF OUR PRODUCT MANUALS. Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locater: Eccotemp.
Phone: 866-356-1992 | Email: Support@eccotemp.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 WARNING If your water heater requires a reset, be sure to TURN OFF THE BREAKERS prior to resetting the unit. Resetting your unit without turning off the breakers can result in personal injury and damage to your water heater. WARNING! There is water contained in the coils of your water heater at all times.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 CONTENTS WARNINGS This is not a do-it-yourself project. Failure to have this appliance installed by a licensed plumber and electrician will void all warranties.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 PRODUCT FEATURES The Eccotemp iE Electric tankless water heaters include patented technology with multi-safety devices, including the following features: 1. Tankless, instantaneous heating for on demand hot water, No pre-heating. No stand-by heating loss. Energysaving. 2. Micro-computer control, adopting patented heating technology.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 ELECTRICAL DIAGRAM MODEL iE-11 iE-15B THERMAL CUT-OUT 95℃ L1 T1 R1 T2 R2 CONTROL SYSTEM L2 E DISPLAY SCREEN OUTLET TEMP.SENSOR INLET TEMP.SENSOR FLOWMETER REMARK: J:RELAY R:HEATING SYSTEM T:TRIAC MODEL iE-15A iE-18 THERMAL CUT-OUT 90℃ L1 T1 R1 T2 R2 L2 CONTROL SYSTEM L1' L2' E OUTLET TEMP.SENSOR DISPLAY SCREEN INLET TEMP.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 ELECTRICAL DIAGRAM CONTINUES... MODEL iE-21 iE-24 iE-27 THERMAL CUT-OUT 90℃ L1 L2 L1' L2' CONTROL SYSTEM L1" L2" E DISPLAY SCREEN OUTLET TEMP.SENSOR T1 R1 T2 R2 T3 R3 INLET TEMP.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 PRODUCT INNER STRUCTURE MODEL iE-11 10.9 in. bottom case heating chamber 17.3 in. control board Display screen Display screen Temp.sensor flowmeter MODEL iE-15B Terminal blocks 17.3 in. 10.9 in. MODEL iE-15A iE-18 10.9 in. bottom case 17.3 in. heating chamber control board Display screen Display screen Temp.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 PRODUCT INNER STRUCTURE CONTINUES... MODEL iE-21 iE-24 iE-27 10.9 in. bottom case 17.3 in. heating chamber control board Display screen Display screen Temp.sensor flowmeter Terminal blocks INSTALLATION GUIDELINE NOTE: The installation must be in compliance with the National Electrical Code, your local electrical and plumbing codes. 1.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 INSTALLATION LOCATION & METHOD Fixed installation on the wall Locate an appropriate place on a section of wall that meets all safety and installation requirements Fig 1 Front and back of the appliance Fig 2 Remove screw which fixed the bracket on back of the appliance. Fig 3 Hold the back bracket hanger in position against the wall in the desired hanging location.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 INSTALLATION LOCATION & METHOD CONTINUED... Fig 4 Remove (4) screws and washers from the unit to free the front cover. Carefully lift the front cover off the unit a few inches. Disengage the ribbon cable connecting the front cover LCD panel to the main control board of the unit. Remove cover completely.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 INSTALLATION LOCATION & METHOD CONTINUED... Fig 6 Connect the cable to the terminal blocks, please notice the guidance logo below the terminal blocks. iE 11, iE15B will be connected to one circuit breaker. iE15A, iE18 will be connected to two circuit breakers. iE21, iE24, iE27 will be connected to three circuit breakers.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 INSTALLATION LOCATION & METHOD CONTINUED... Fig 8 Connect the water pipe to the water inlet and water outlet connections, please remember to install the rubber seal ring. Please note: Use a backup wrench when installing water fittings. Fig 9 Connect the valve cover. PLEASE NOTE: THIS MANUAL IS SUBJECT TO CHANGE AT ANYTIME, TO ENSURE THIS MANUAL IS UP TO DATE PLEASE VISIT OUR HELP DESK AT WWW.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 Water connections 1. 2. 3. 4. 5. All water pipe must comply with national and applicable state and local water pipe codes. The unit should be connected directly to the main water supply.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 TROUBLE-SHOOTING Problems Possible Causes Corrective Actions 1. Inlet and outlet fittings leaking A. Fittings are not tight B. Rubber washer worn-out A. Tighten fittings. B. Change rubber washer. 2. No LED signal A. Power not connected. B. LED damaged. A. Connect power to the unit. B. Change LED. 3. Functional keys not working A. No water out from shower. B. Water pressure too low. C.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 Eccotemp Systems ,LLC Limited Warranty Information MODELS: iE-11 iE-15B iE-15A iE-18 iE-24 iE-27 Eccotemp hereby warrants this product to be free of material defects in materials and workmanship when installed and operated according to Eccotemp’s installation and operating instructions.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 This Product is not to be used as a pool or spa heater. In the event of an Eccotemp Systems recognized defect, malfunction, or failure to conform to this Warranty and based upon Eccotemp approval of warranty claim, Eccotemp Systems, at its sole and absolute discretion, will settle the warrant claim of such defect, malfunction, or failure to conform to this Warranty.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 CHECK OUT SOME OF OUR OTHER ECCOTEMP PRODUCTS WHOLE HOME PRODUCT COMPARISONS fvi12 i12 45-H 45-HI fvi12 i12 45-H 45-HI INSTALLATION INDOOR ONLY INDOOR ONLY OUTDOOR ONLY INDOOR ONLY BTU 74,000 80,000 140,000 140,000 Flow Rate 3.6 GPM 3 GPM 6.8 GPM 6.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 PLEASE NOTE: THIS MANUAL IS SUBJECT TO CHANGE AT ANYTIME, TO ENSURE THIS MANUAL IS UP TO DATE PLEASE VISIT OUR HELP DESK AT WWW.ECCOTEMP.COM FOR ALL OF OUR PRODUCT MANUALS. Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locater: Eccotemp.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 VEUILLEZ PRENDRE NOTE QUE CE MANUEL EST SUJET À MODIFICATION EN TOUT TEMPS. POUR VOUS ASSURER DE SA MISE À JOUR, VEUILLEZ VISITER NOTRE SERVICE D’ASSISTANCE À L’ADRESSE SUIVANTE : WWW.ECCOTEMP.COM POUR TOUS LES MANUELS DE NOS PRODUITS Service Après-Vente: Eccotemp.com/help-desk Magasinez en ligne: Eccotemp.com/products Localisateur de Magasin: Eccotemp.
Tél: 866-356-1992 | Courriel: Support@eccotemp.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 AVERTISSEMENT Si votre chauffe-eau nécessite une réinitialisation, assurez-vous d’ÉTEINDRE LES DISJONCTEURS avant de réinitialiser l’unité. Le fait de réinitialiser votre unité sans éteindre préalablement les disjoncteurs peut entraîner des dommages corporels et des dommages matériels pour votre chauffe-eau. ATTENTION ! Il y a de l’eau à l’intérieur des serpentins de votre chauffe-eau en tout temps.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 AVERTISSEMENTS Ce montage ne peut pas être considéré comme un projet de bricolage à réaliser par soi-même. L’absence de montage par un plombier et électricien agréé annulera toutes les garanties.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 FONCTIONNALITÉS DU PRODUIT Les chauffes-eau Électriques sans Réservoir Eccoptemp de série iE contiennent une technologie brevetée possédant de multiples dispositifs de sécurité, incluant les fonctions suivantes: 1. Un réchauffement instantané sans réservoir pour de l’eau chaude à la demande. Pas de préchauffage. Pas de perte de chaleur en dormance. Économie d’énergie. 2.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 SCHÉMAS ÉLECTRIQUES MODÈLE iE-11 iE-15B THERMAL CUT-OUT 95℃95 °C THERMOCONTACTEUR L1 SYSTÈME CONTROL DESYSTEM CONTRÔLE L2 T1 R1 T2 R2 E ÉCRAN DISPLAY SCREEN D›AFFICHAGE OUTLET TEMP.SENSOR CAPTEUR DE TEMPÉRATURE DE SORTIE INLET TEMP.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 SUITE DES SCHÉMAS ÉLECTRIQUES... MODEL iE-21 iE-24 iE-27 THERMOCONTACTEUR THERMAL CUT-OUT90⁰ 90℃C L1 L2 L1' L2' SYSTÈME CONTROL DESYSTEM CONTRÔLE L1" L2" E ÉCRAN DISPLAY D›AFFICHAGE SCREEN CAPTEUR DE TEMPÉRATURE DE SORTIE OUTLET TEMP.SENSOR T1 R1 T2 R2 T3 R3 INLET TEMP.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 STRUCTURE INTÉRIEURE DU PRODUIT MODÈLE iE-11 10.9 in. BOÎTIER case bottom CHAMBRE DE CHAUFFE heating chamber 17.3 in. TABLEAUboard DE CONTRÔLE control Display screen ÉCRAN D›AFFICHAGE Display screen ÉCRAN D›AFFICHAGE CAPTEURS DE Temp.sensor TEMPÉRATURE Terminal BORNIERS blocks DÉBITMÈTRE flowmeter MODÈLE iE-15B 10.9 in. BOÎTIER CHAMBRE DE 17.3 in.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 STRUCTURE INTÉRIEURE DU PRODUIT... MODÈLE iE-21 iE-24 iE-27 10.9 in. BOÎTIERcase bottom CHAMBRE DE heating chamber 17.3 in. CHAUFFE TABLEAUboard DE CONTRÔLE control ÉCRAN D›AFFICHAGE Display screen ÉCRAN D›AFFICHAGE Display screen CAPTEURS DE Temp.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 EMPLACEMENT D’INSTALLATION ET MÉTHODE Installation fixe sur le mur Déterminez un emplacement approprié sur la section du mur qui rencontre toutes les conditions d’installation et de sécurité nécessaires. Fig 1 Avant et arrière de l’appareil Fig 2 Enlever la vis qui attachait le support à l’arrière de l’appareil.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 SUITE DE L’EMPLACEMENT ET MÉTHODE D’INSTALLATION... Fig 4 Retirez les (4) vis et les rondelles de l’unité pour libérer le capot avant. Avec précaution, soulevez le capot avant de l’unité de quelques pouces. Dégager le câble ruban en raccordant le panneau LCD avant du capot avant au tableau de contrôle principal de l’unité. Retirez le capot complètement.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 SUITE DE L’EMPLACEMENT ET MÉTHODE D’INSTALLATION... Fig 6 Raccordez le câble aux borniers, veuillez noter le symbole de guidage en-dessous des borniers. iE 11, iE15B seront raccordés à un disjoncteur. iE15A, iE18 seront raccordés à deux disjoncteurs, iE21, iE24, iE27 seront raccordés à trois disjoncteurs.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 SUITE DE L’EMPLACEMENT ET MÉTHODE D’INSTALLATION... Fig 8 Raccordez le tuyau d’eau aux raccordements d’entrée et de sortie d’eau, n’oubliez pas d’installer le joint d’étanchéité en caoutchouc. Veuillez noter : Utilisez une contre-clé quand vous installez des raccords d’eau. Fig 9 Raccordez le couvercle de la soupape VEUILLEZ PRENDRE NOTE QUE CE MANUEL EST SUJET À MODIFICATION EN TOUT TEMPS.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 Raccordements d’eau 1. 2. 3. 4. 5. Toute conduite d’eau doit être en conformité avec les codes de canalisation d’eau nationaux, provinciaux et locaux applicables. L’unité doit être raccordée directement à l’approvisionnement en eau central. Rincez le tuyau avec de l’eau de façon à le débarrasser de tout débris ou particule instable.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 DÉPANNAGE Problèmes Causes Possibles Actions Correctrices 1. Fuites sur les raccords d’entrée et de sortie A. Les raccords ne sont pas assez serrés B. Le joint en caoutchouc est usé A. Resserrer les raccords B. Changer le joint en caoutchouc. 2. Pas de signal LED A. L’alimentation n’est pas branchée. B. La lumière/ampoule LED est abîmée. A. Brancher l’alimentation à l’unité. B.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 Eccotemp Systems, LLC Information de Garantie Limitée MODÈLES: iE-11 iE-15B iE-15A iE-18 iE-24 iE-27 Par la présente Eccotemp garantit que ce produit est exempt de défauts matériels en termes de matériaux et de fabrication quand installé et utilisé selon les instructions d’installation et de fonctionnement d’Eccotemp.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 Ce produit ne doit pas être utilisé comme un appareil de chauffage de piscine ou de spa.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 JETEZ UN COUP D’OEIL À CERTAINS DE NOS AUTRES PRODUITS ECCOTEMP COMPARAISONS DE PRODUITS POUR LA MAISON fvi12 i12 45-H 45-HI fvi12 i12 45-H 45-HI INSTALLATION À L’INTÉRIEUR UNIQUEMENT À L’INTÉRIEUR UNIQUEMENT À L’EXTÉRIEUR UNIQUEMENT À L’INTÉRIEUR UNIQUEMENT BTU 74,000 80,000 140,000 140,000 Débit 3.6 GPM 3 GPM 6.8 GPM 6.
Tél: 866-356-1992 | Courriel: Support@eccotemp.com | Adresse: 315 - A Industrial RD Summerville, SC 29483 VEUILLEZ PRENDRE NOTE QUE CE MANUEL EST SUJET À MODIFICATION EN TOUT TEMPS. POUR VOUS ASSURER DE SA MISE À JOUR, VEUILLEZ VISITER NOTRE SERVICE D’ASSISTANCE À L’ADRESSE SUIVANTE : WWW.ECCOTEMP.COM POUR TOUS LES MANUELS DE NOS PRODUITS Service Après-Vente: Eccotemp.com/help-desk Magasinez en ligne: Eccotemp.com/products Localisateur de Magasin: Eccotemp.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 PLEASE NOTE: THIS MANUAL IS SUBJECT TO CHANGE AT ANYTIME, TO ENSURE THIS MANUAL IS UP TO DATE PLEASE VISIT OUR HELP DESK AT WWW.ECCOTEMP.COM FOR ALL OF OUR PRODUCT MANUALS. Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locater: Eccotemp.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 Eccotemp Systems, LLC 315-A Industrial Road Summerville, SC 29483 866-356-1992 CALENTADOR DE AGUA ELÉCTRICO SIN TANQUE Eccotemp Systems, LLC 315-A Industrial Road Summerville, SC 29483 866-356-1992 CALENTADOR DE AGUA ELÉCTRICO SIN TANQUE MODELO #: RIESGO DE DESCARGA ELÉCTRICA iE-11 4002422 CLASIFICACIÓN: RIESGO DE DESCARGA ELÉCTRICA 0.85-3.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 ADVERTENCIA Si su calentador de agua requiere un reinicio, asegúrese de apagar los interruptores antes de reiniciar la unidad. Reiniciar su unidad sin apagar los interruptores puede resultar en lesiones personales y daños en su calentador de agua. ¡ADVERTENCIA! Hay agua contenida en las enroscaduras de su calentador de agua en todo momento.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 ADVERTENCIAS Este no es un proyecto para hacer usted mismo. Si este sistema no es instalado por un plomero y electricista se anularán todas las garantías. Bajo ninguna circunstancia debe intentar instalar, reparar o desmontar el calentador eléctrico de agua sin tanque Eccotemp sin primero apagar toda la alimentación a la unidad directamente en la caja de interruptores de circuito.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 CARACTERÍSTICAS DEL PRODUCTO Los calentadores eléctricos de agua sin tanque Eccotemp iE incluyen tecnología patentada con múltiples dispositivos de seguridad, incluyendo las siguientes características: 1. Sin tanque, para calentamiento instantáneo de la demanda de agua caliente, Sin precalentamiento. No hay pérdida de calentamiento por espera. Ahorra energía. 2.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 DIAGRAMA ELÉCTRICO MODELO iE-11 iE-15B THERMAL CUT-OUT 95℃ LIMITACIÓN TÉRMICA 95 °C L1 SISTEMA DE CONTROL SYSTEM CONTROL L2 T1 R1 T2 R2 E DISPLAY OUTLET TEMP.SENSOR SENSORES DE TEMPERATURA DE SALIDA PANTALLA SCREEN INLET TEMP.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 CONTINUACIÓN DEL DIAGRAMA ELÉCTRICO... MODELO iE-21 iE-24 iE-27 LIMITACIÓN TÉRMICA90 90 THERMAL CUT-OUT ℃°C L1 L2 L1' L2' SISTEMA DE CONTROL CONTROL SYSTEM L1" L2" E SENSORES DE TEMPERATURA DE SALIDA OUTLET TEMP.SENSOR DISPLAY SCREEN PANTALLA T1 R1 T2 R2 T3 R3 INLET TEMP.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 ESTRUCTURA INTERNA DEL PRODUCTO MODELO iE-11 10.9 in. bottom case CARCASA INFERIOR CÁMARA DE CALENTAMIENTO heating chamber 17.3 in. control board TABLERO DE CONTROL Display screen PANTALLA Display screen PANTALLA SENSOR DE Temp.sensor TEMPERATURA MEDIDOR DE FLUJO flowmeter MODELO iE-15B Terminal blocks CONECTORES 10.9 in. CARCASA INFERIOR CÁMARA DE 17.3 in.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 ONTINUACIÓN DE LA ESTRUCTURA INTERNA DEL PRODUCTO... MODELO iE-21 iE-24 iE-27 10.9 in. bottom case CARCASA INFERIOR CÁMARA DE heating chamber 17.3 in. CALENTAMIENTO TABLERO DE CONTROL control board PANTALLA Display screen PANTALLA Display screen SENSOR DE Temp.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 MÉTODO Y UBICACIÓN DE LA INSTALACIÓN Instalación fija en la pared Ubique en un lugar apropiado sobre una sección de pared que cumpla todas las condiciones de seguridad para la instalación Fig 1 Parte delantera y trasera de la instalación Fig 2 Retire el tornillo que fija el soporte en la parte trasera del aparato.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 CONTINUACIÓN DE MÉTODO Y UBICACIÓN DE LA INSTALACIÓN... Fig 4 Retire (4) tornillos y arandelas de la unidad para liberar la cubierta frontal. Levante con cuidado la tapa frontal de la unidad algunas pulgadas. Desenganche el cable plano que conecta el panel de la cubierta LCD frontal a la placa de control principal de la unidad. Retire la cubierta completamente.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 CONTINUACIÓN DE MÉTODO Y UBICACIÓN DE LA INSTALACIÓN... Fig 6 Conectar el cable a los conectores, por favor, observe el logotipo de guía debajo de los conectores. iE 11, iE15B serán conectados a un interruptor de circuito. iE15A, EI18 serán conectados a dos interruptores de circuito. EI21, EI24, iE27 serán conectados a tres interruptores de circuito.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 CONTINUACIÓN DE MÉTODO Y UBICACIÓN DE LA INSTALACIÓN... Fig 8 Conecte la tubería de agua a las conexiones de entrada y salida del agua, no olvide instalar la junta de goma. Tenga en cuenta: Utilizar una llave de copia de seguridad al instalar los acoples de agua.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 Conexiones de agua 1. 2. 3. 4. 5. Todas las tuberías de agua deben cumplir con los códigos nacionales y los códigos de tuberías de aguas estatales y locales. La unidad debe estar conectada directamente a la red principal de agua. Enjuague la tubería con agua para eliminar cualquier residuo o partículas sueltas.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 SOLUCIÓN DE PROBLEMAS Problemas Causas posibles Correcciones 1. Los accesorios de entrada y salida con fugas A. guarniciones flojas B. arandela de goma desgastada A. Ajuste las conexiones. B. Cambie la arandela de goma. 2. Sin LED de señal A.alimentación no conectada. B.LED dañado. A. Conecte a la unidad. B. Cambie LED. 3. Teclas funcionales no funcionan A.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 Sistemas Eccotemp,LLC Información sobre garantía limitada MODELOS: iE-11 iE-15B iE-15A iE-18 iE-24 iE-27 Eccotemp da garantía de que este producto estará libre de defectos de materiales y mano de obra cuando se instale y se opere de acuerdo con las instrucciones de instalación y funcionamiento de Eccotemp.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 12. 12. Los actos de Dios, incluyendo, pero no limitados a; incendio, inundación, o un desastre natural. Este producto no debe ser utilizado como una piscina o un calentador de hidromasaje.
Teléfono: 866-356-1992 | Email: Support@eccotemp.com | Dirección: 315 - A Industrial RD Summerville, SC 29483 VER ALGUNOS DE LOS DEMÁS PRODUCTOS ECCOTEMP COMPARACIÓN DE PRODUCTOS PARA TODO EL HOGAR fvi12 i12 45-H 45-HI fvi12 i12 45-H 45-HI INSTALACIÓN SÓLO INTERIORES SÓLO INTERIORES SÓLO EXTERIORES SÓLO INTERIORES BTU 74,000 80,000 140,000 140,000 Caudal 3.6 GPM 3 GPM 6.8 GPM 6.
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 PLEASE NOTE: THIS MANUAL IS SUBJECT TO CHANGE AT ANYTIME, TO ENSURE THIS MANUAL IS UP TO DATE PLEASE VISIT OUR HELP DESK AT WWW.ECCOTEMP.COM FOR ALL OF OUR PRODUCT MANUALS. Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locater: Eccotemp.