Instruction manual

39
EN
7. When you hold BACK/NEXT during playback, you will move fast ahead or back within the played song.
REPEAT FUNCTION
You can select between di erent repeat modes when you press the REPEAT button.
If you want to repeat the song, which you just played, press REPEAT. Flashing symbol
REPEAT
appears.
If you want to repeat all the songs on the disc, press the REPEAT button twice. Symbol
REPEAT
is displayed
continuously.
PROGRAMMING OF THE CD PLAYER
1. You can program playback of at least 20 tracks in any order.
2. Prior to programming, do not forget to press the STOP button.
3. Press the PROGRAM button. The display shows symbol
P
( ashing) and information “P01” indicating
that the device is ready to save the  rst track in memory (position 1).
4. Press the NEXT button, or BACK to select the number of the song, which you want to save to the  rst
position in the program and then press the PROGRAM button to con rm your selection.
5. After you press the PROGRAM button, the device moves to the next position in the program (e. g. for the
2nd position, “P02”is displayed).
6. Repeat the previous two steps to select the next songs, which you want to include in the program. Do
not forget to press the PROGRAM button after each selection.
7. Press PROGRAM after programming in all the desired songs.
8. The symbol
P
remains on the display indicating that the program is saved in the memory of the device.
9. Press the PLAY button to start playback of the program saved in the memory.
10. Press BACK/NEXT button to skip to the previous/next song in the program.
11. If you want to erase the program from the memory, simply press the STOP button twice (symbol
P
disappears) or switch the device o .
PLAYING MP3 DISCS (Only for CDR 699 USB)
1. Insert the MP3 disc and close the door of the disc tray.
2. Move the function switch to “CD/MP3/USB/AUX” position.
3. The disc will turn and the device will perform a complete inventory of the disc’s content and calculate
the total number of tracks. The display will show the total number of tracks on the disc. Then it starts
playback of the  rst song on the disc and the display shows the number of the played track (
001).
4. If the disc contains folders (see later), the display shows the number of the folder every 5 seconds
(e.g.F01, F02, etc.)
5. You can skip during the playback one track ahead or one track back by pressing the BACK/NEXT buttons.
6. MP3 discs usually contain more folders containing individual tracks (e. g. the songs of one album always
in a separate folder).
7. If the MP3 CD does not contain any folders, you can use the FOLDER +/SKIP 10 button to skip 10 songs
forward. This is a useful feature, especially if the disc contains large number of songs and you want to
jump quickly to a certain concrete song.
Press shortly (several times) the FOLDER +/SKIP 10 button to move close to the desired song and then,
using the BACK/NEXT buttons move to the desired song.
8. If the songs on the MP3 CD are ordered in folders, you can press and hold (for about 2 seconds) the
FOLDER +/SKIP 10 button to select the folder, which you want to play.
Always, when you press and hold (for about 2 seconds) the FOLDER +/SKIP 10 button, the player skips
to the  rst track in the following folder. The display shows alternately the song number and the folder
number.
Note: The “folder” feature works only for MP3 discs with folders. If there are no folders on the disc, the
long pressing of the FOLDER +/SKIP 10 causes skipping 10 songs ahead.