Instruction manual

PLAYING MP3 SONGS FROM USB DRIVES (For CDR 699 USB only)

1. Insert the USB Flash drive in the USB port.

2. Move the functions switch in the “CD/MP3/USB/AUX”position.

3. The display shows the total number of folders (if there are folders on the USB drive) and the total number

of songs. Then, the  rst track on the disc starts playing and the display shows the number of the currently

played song (

001).

4. You can skip during the playback one track ahead or one track back by pressing the BACK/NEXT buttons.

5. You can also use the FOLDER +/SKIP 10 button, the same way as with MP3 CDs.

Switching from CD/CD-MP3 mode to USB mode

1. Press the STOP button.

2. Insert the USB drive in the USB port.

3. Press and hold the PLAY/PAUSE/USB button, until the display shows “USB”. The  rst song starts to play.

Switching from USB mode to CD/CD-MP3 mode

1. Press the STOP button.

2. Press and hold for about 2 seconds the PLAY/PAUSE/USB button.

3. The disc will turn and the device will perform a complete inventory of the disc’s content and calculate

the total number of tracks. The display will show the total number of tracks on the disc. The  rst song on

the disc starts to play.

NOTES ABOUT USB (For CDR 699 USB only)

The format of the MP3 title names

When naming the MP3 songs, please use only the English alphabet letters (A to Z) and numbers (0 to 9). Using

characters “_” (underlining) or “ ” (space) can result in unreadable  les or incorrect sorting.

Note: Even though this device is fully compatible with USB 1.1 and USB 2.0 standards, a small percentage of

USB drives (about 5%) may be unreadable for this device, because of failure of the manufacturer of the

USB drives to comply with standards.

Disconnecting the USB drive

Never disconnect a USB drive when playing MP3 songs from the USB disc. Always press STOP  rst, and then

hold for 2 seconds the PLAY/PAUSE/USB button to switch the device into a CD mode. You will prevent this

way a possible damage of the music  le or of the memory device.

Attention:

This device does not support MP3 players because of their fundamental software incompatibility. It is

possible to use “USB keychains” (USB  ash drives) only for playing MP3 songs.

Important

Do not use USB extension cables to connect a USB drive to the device. These cables can transmit interference

that disrupts the transmission of data and prevents a normal use of the USB port. Always connect the USB

drive to the USB port DIRECTLY, without an extension cable.