User's Manual

14 Meter Operation
Item Displayed Value
Format
Indicator Function
All segments lit All Confirms proper operation of the display.
Value ID code Any letter or number
x.x.x.x.
Identification code for present displayed
value. Maximum of 4 characters, letters or
numbers.
Value xxxxx.x.x.x Number value. Maximum of 8 numbers and
decimal point of 3 possible places.
Present tariff period
T1, T2, T3, T4
Indicates the present operating tariff period.
Forward active
energy
Indicates that forward active energy is
flowing.
This is also displayed if there is no present
active energy flow and the previous flow
was in the forward direction.
Reverse active
energy
Indicates that reverse active energy is
flowing.
This is also displayed if there is no present
active energy flow and the previous flow
was in the reverse direction.
Import reactive
energy
Indicates that import reactive energy is
flowing.
This is also displayed if there is no present
reactive energy flow and the previous flow
was in the import direction.
Export reactive
energy
Indicates that export reactive energy is
flowing.
This is also displayed if there is no present
reactive energy flow and the previous flow
was in the export direction.
Control relay 1 open
Indicates that control relay 1 is in the open
position.
Control relay 2 open
Not used.
Load disconnect
open
This display indicator can be configured by
the user to either reflect the current state of
the load disconnect contactor, or to indicate
whether or not load side voltage has been
detected by the meter.
For more information on this, see “Display
Indicator for Disconnect Position and Load
Side Voltage” on page 1.
Dollar value xxxxx.x.x.x
$
(Not used) Currency value of prepay credit
remaining is displayed in Dollars.
Euro value xxxxx.x.x.x
€
(Not used) Currency value of prepay credit
remaining is displayed in Euros.
Correct 3-phase
wiring
L1L2L3
Correct wiring configuration order for all 3
phases. (Does not detect reversed line and
load wires or swapped line and neutral.)