User's Manual

ANSI Electric Meter v3.1 User’s Guide 15
Item Displayed Value
Format
Indicator Function
Reverse 3-phase
wiring
L3L2L1
Indicates that 3-phase wiring is installed in
the wrong order. (Does not detect reversed
line and load wires or swapped line and
neutral.)
Tamper switch open
Indicates that the main cover tamper switch
is open. The cover is not installed or not
installed correctly.
PLC traffic detection
This icon is lit when PLC communication on
the network has been detected by the
meter. See “Power Line Carrier
Communication” on page 1 for detailed
information.
PLC received
message occurrence
and quality
This icon indicates that PLC
communication occurred with this specific
meter within the last X minutes (X is
configurable from 1 to 65535 minutes) and
shows the quality of the most recent
received PLC message.
– No bars = no message received for this
meter
– Smallest bar = a poor quality message
– Both smallest and medium bar = a
medium quality message
– All three bars = a high quality message
See “Power Line Carrier Communication”
on page 1 for detailed information.
Line 1 voltage
L1
Indicates that voltage is present on line 1.
Line 2 voltage
L2
Indicates that voltage is present on line 2.
Line 3 voltage
L3
Indicates that voltage is present on line 3.
Meter date dd:mm:20yy
DATE
Present local date in meter, or a self-read
record date, is displayed.
Meter time hh:mm:ss
TIME
Present local DST time in meter, or a self-
read record time, is displayed.
Reactive energy xxxxx.x.x.x
kvarh
Accumulated import or export reactive
energy is displayed.
Active energy xxxxx.x.x.x
kWh
Accumulated kilowatt-hours of forward,
reverse, forward + reverse, or forward –
reverse active energy is displayed.
Reactive power xxxxx.x.x.x
kvar
Import or export reactive power is
displayed.
Active power xxxxx.x.x.x
kW
Kilowatts of forward or reverse active power
is displayed.
End of Interval
EOI
(Not used) Indicates that a demand reset
has occurred and that a new demand
interval has started.