EX-3 INSTRUCTION MANUAL
Hello, I am Lou Lentine, President of Echelon, and I would like to welcome you to the Echelon community. You’ve made a great decision for yourself and your family. The Echelon Experience is an innovative combination of fitness products integrated with our state-of-the-art Echelon Fit App. This brand-new, fitness lifestyle connects your family, friends, the Echelon community, and Echelon instructors together to help you with your fitness goals.
INCLUDES 5 2 3 1 7 6 4 8 9 11 12 13 10 14 17 PARTS LIST 16 15 19 18 20 21 22 23 24 1. H andlebar adjustment lever 2. Handlebar post f rame 3. Resistance adjustment lever 4. Cranks 5. Seat post with dumbbell holder 6. S eat height adjustment lever 7. S eat slide adjustment lever 8. F ront bracket 9. R ear bracket 10. Handlebars 11. Front foot 12. Rear foot 13. Seat 14. Console with tablet holder 15. H andlebar post 16. Pedals 17. Water bottle holders 18. Foot bolts 19.
ACCOUNT CREATION If this product was purchased on the echelonfit.com website, you should have received an activation email. Go to member.echelonfit.com and follow the on-screen instructions to choose a plan and setup your account. This info will be needed to login to your account on the Echelon FitTM App. All account info and plans are managed at member.echelonfit.com and use the same login. After creating your account login on member.echelonfit.com, write down your login info.
DOWNLOAD THE ECHELON FIT APP Ensure latest version of the Echelon Fit™ App is installed from the Google Play Store or the App Store. OPERATIONAL INSTRUCTIONS QUICK START GUIDE Connect to the Echelon FitTM App to access tutorials and operation instructions.
3. 1. 2. 2. 1. 3. Loosen bolts in order. Remove cardboard and then repeat on other side. Remove bolts on both sides with included tools as shown. Hold cardboard piece and remove f rame f rom bike. 2. 1. Remove bolts in order with included tools as shown. REMOVAL OF FRAME Remove bolts in order.
1. 2. ASSEMBLY Use a pair of scissors or wire cutters to cut zip ties around wheel chocks. Using one of the wrenches, knock out the f ront then the back chock. Insert foot bolts into f ront foot. Use the included hex key to remove the metal f ront bracket support. Tighten down foot bolts with included hex key. Place the f ront foot (with wheels) under the f ront bracket. Place the rear foot under the rear bracket.
Insert foot bolts into rear foot. Bolt dumbbell holder onto seat post with included hex key. Pull the two wires out of f rame and tie them together with included twist tie that is attached to the handlebar post’s bracket. ASSEMBLY Place seat onto seat post and tighten down and secure with included wrench. Tighten down foot bolts with included hex key.
0 ASSEMBLY Feed wires into the handlebar post. Gently work the wires through post. Pull wires out of the hole at the top of the post. Make sure to pull out enough length to complete the next steps. Unwrap the twist tie and separate the wires.
Place handlebars on handlebar post. While holding handlebars in place, insert bolts and f inger tighten. Remove screws f rom the back of the console with screwdriver on included hex key. Use included hex key to tighten and secure handlebars in place. ASSEMBLY Ensure wires are still pulled out and insert post into the f rame while pulling out handlebar adjustment lever.
ASSEMBLY 2 Place console onto handlebars. Attach back of console to handlebars by inserting screws and f inger tightening. Use screwdriver on included hex key to tighten and secure console in place. Connect wires to console. Remove nut f rom right pedal by turning counterclockwise. Screw right pedal onto right crank arm clockwise. Use double sided wrench to ensure pedal is f irmly seated against crank arm.
Finger tighten nut clockwise back onto pedal bolt. Finger tighten nut counterclockwise back onto pedal bolt. Remove nut f rom left pedal by turning clockwise. Hold pedal with double sided wrench and use single sided wrench to tighten nut counterclockwise. ASSEMBLY Screw left pedal onto crank arm counterclockwise. Use double sided wrench to ensure pedal is f irmly seated against crank arm. Hold pedal with double sided wrench and use single sided wrench to tighten nut clockwise.
ASSEMBLY 4 Hold water bottle holder against holes at the base of handlebar post f rame and attach with screws. Finger tighten screws, then use the screwdriver on included hex key to secure. Repeat on opposite side. Plug power adapter into port located on the rear foot bracket, then plug into wall outlet.
Move seat along track to desired location. Turn seat slide adjustment lever clockwise to tighten and secure in place. Turn seat height adjustment lever counterclockwise until you are able to pull the lever halfway out. Pull and hold the seat height adjustment lever and raise the seat to desired position. Turn seat height adjustment lever clockwise until secure. Turn handlebar adjustment lever counterclockwise until you are able to pull the lever halfway out.
6 TABLET HOLDER ADJUSTMENT Push red knob on the side of the console inward, then adjust tablet holder to desired angle. To accommodate various tablet sizes, turn knob on the back of tablet holder counterclockwise release clamp. Adjust clamp to desired height and turn knob clockwise to secure.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT 15.21 YOU ARE CAUTIONED THAT CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PART RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 15.105(B) THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION.
8 INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA (ISED) INNOVATION, SCIENCE ET DÉVELOPPEMENT ÉCONOMIQUE CANADA (ISED) THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003 CET APPAREIL NUMÉRIQUE DE CLASSE B EST CONFORME À LA NORME NMB-003. CANADIAN NOTICE THIS DEVICE COMPLIES WITH ISED LICENSE-EXEMPT RSS STANDARD(S).
NOTE: CARE SHOULD BE TAKEN IN MOUNTING AND DISMOUNTING THE STATIONARY EXERCISE BIKE. BEFORE MOUNTING OR DISMOUNTING MOVE THE PEDAL ON THE MOUNTING OR DISMOUNTING SIDE TO ITS LOWEST POSITION AND BRING THE MACHINE TO A COMPLETE STOP. THE MANUFACTURER RECOMMENDS TO PLACE THE ECHELON® CONNECT BIKE IN A SPACE WHERE YOU HAVE TWO FEET OF CLEARANCE ON ALL SIDES OF THE BIKE FOR SAFE MOUNTING AND DISMOUNTING OF THE EXERCISE BIKE. THE MINIMUM DIMENSIONS ARE: 0.5 M (19.7 IN.) ON AT LEAST ONE SIDE, AND 0.5 M (19.7 IN.
0 1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2. Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons. 3.
BEFORE starting any fitness or strength program, consult with your physician or health official. This will ensure that you engage in the proper strength or fitness program for your age and physical condition.
2 • NEVER use the bike if it is not properly/completely assembled or is damaged in any way. •N EVER exceed the weight limit for this bike. The weight limit for this bike is 300 pounds. Do not use the Echelon® Connect if your body weight is in excess of 300 pounds. • NEVER use Echelon® Connect when sick or fatigued. •A LWAYS wear proper attire and footwear that fully covers your feet. Long hair should be tied back or tucked away. Ensure that shoelaces are tucked into your shoes.
•A LWAYS ensure that the Echelon® Connect is wiped down after each use to keep it sanitary. • Cleaning and user maintenance shall not be made by children without supervision. If any problems arise affecting the performance of the Echelon® Connect, contact the manufacturer immediately. Always ensure that parts which undergo wear are checked regularly.
4 Read Instructions Before Operating MADE IN CHINA PATENT PENDING Rev: 060120 ECHELONFIT.COM For questions, assistance, or replacement parts, do not return to your retailer. Contact Echelon® customer service below. For refunds on items not purchased from Echelon® directly, please contact your retailer. ECHELON® FIT 1-YEAR LIMITED WARRANTY Echelon warrants this product to be free of manufacturing defects.